S-PAutomotive.com

Author Topic: What pump for old style 10mm head ?  (Read 2185 times)

April 16, 2019, 02:50:22 pm

Bigmick77380

  • Junior

  • Offline
  • **

  • 50
What pump for old style 10mm head ?
« on: April 16, 2019, 02:50:22 pm »
Hi guys,

I'm looking for a 10mm head that fit on the old style camplate (like 1.6 or early AAZ).
Somebody know on what pump i can find one of these ?

Have nice day



Reply #1April 20, 2019, 03:17:18 pm

RustyCaddy

  • Veteran

  • Offline
  • ***

  • 385
Re: What pump for old style 10mm head ?
« Reply #1 on: April 20, 2019, 03:17:18 pm »
Maybe check this thread (IIRC it has links to other info if they are not dead):

http://forums.tdiclub.com/showthread.php?t=404118

Have read a good match is a AAZ camplate and 10mm AHU plunger/distributive head.
« Last Edit: April 21, 2019, 05:16:54 pm by RustyCaddy »

Reply #2April 23, 2019, 04:48:05 pm

Bigmick77380

  • Junior

  • Offline
  • **

  • 50
Re: What pump for old style 10mm head ?
« Reply #2 on: April 23, 2019, 04:48:05 pm »
First, thank's for the answer !

I already read this thread, and it's not exactly what i'm talking about.
Tdi plunger (1z/ahu/afn/...) don't fit the early aaz camplate, they have like 0.4 mm difference of diameter, and the camplate pin have a diameter difference too...
 So i search a 10mm distributor that fit into my aaz camplate
« Last Edit: April 23, 2019, 04:58:08 pm by Bigmick77380 »

Reply #3April 24, 2019, 11:57:22 am

Buji88

  • User+

  • Offline
  • *

  • 28
Re: What pump for old style 10mm head ?
« Reply #3 on: April 24, 2019, 11:57:22 am »
I've heard the early pumps are a bit harder to find parts for. There may be some options out of Europe. I would suggest pulling the part number off your casing and comparing it to other Bosch units. When I broke my throttle shaft I learned a bit about how important the part numbers are and how hard it can be to find a reliable source, but I guarantee there are other units outside of VW that will work.