Login
▼
Register
Home
Help
Advertise
Login
Register
VWDiesel Blog
Facebook Group
VWD on Twitter
VWDiesel.net The IDI, TDI, and mTDI source.
»
Engine Specific Info and Questions
»
IDI Engine
(Moderators:
malone
,
burn_your_money
,
Vincent Waldon
,
theman53
) »
1Y conrod bearing set number
« previous
next »
Print
Pages: [
1
]
Author
Topic: 1Y conrod bearing set number (Read 1825 times)
April 07, 2019, 11:02:45 pm
thebilgerat
Newbie
Offline
8
1Y conrod bearing set number
«
on:
April 07, 2019, 11:02:45 pm »
Does anyone have a good number for a conrod bearing set for the 1Y? The parts supplier sent me bearings for an AAZ which do not appear to be the same at all.
Thanks!
Logged
Reply #1
April 07, 2019, 11:42:18 pm
thebilgerat
Newbie
Offline
8
Re: 1Y conrod bearing set number
«
Reply #1 on:
April 07, 2019, 11:42:18 pm »
So after some searching it seems that the 1.6L diesel conrod bearings are the ones I want. Are the conrod bearing ends the same diameter as the 1Y? Or do I need to buy oversize/undersize? Rods are standard.
Logged
Reply #2
April 08, 2019, 10:29:04 am
RabbitJockey
Veteran
Offline
5061
Personal Text
America, DUCK YEAH!!!
Re: 1Y conrod bearing set number
«
Reply #2 on:
April 08, 2019, 10:29:04 am »
are you talking about the small end?
Logged
01 Jetta TDI 100% stock daily
81 Rabbit:TDI-M ported head, Frank06 cam, PD intake, hybrid T3 turbo, Renault intercooler, Syl20 11mm pump, light weight fw, and yellow California Clutch clutch kit
Reply #3
April 08, 2019, 04:24:20 pm
libbydiesel
Global Moderator
Veteran
Offline
3416
Re: 1Y conrod bearing set number
«
Reply #3 on:
April 08, 2019, 04:24:20 pm »
The big-end journal diameter for the 1.6 and the AAZ is the same. I don't know about the 1Y. If it is different from the AAZ then it is different from the 1.6.
Logged
Reply #4
April 09, 2019, 02:39:48 pm
thebilgerat
Newbie
Offline
8
Re: 1Y conrod bearing set number
«
Reply #4 on:
April 09, 2019, 02:39:48 pm »
The problem with the AAZ bearings are the notch. The 1Y has a small style notch while the AAZ notch is large and goes completely to the edge. The 1Y rod bearing notch does not go to the edge.
The wrist pin bearings I don't need (small end)
Logged
Print
Pages: [
1
]
« previous
next »
VWDiesel.net The IDI, TDI, and mTDI source.
»
Engine Specific Info and Questions
»
IDI Engine
(Moderators:
malone
,
burn_your_money
,
Vincent Waldon
,
theman53
) »
1Y conrod bearing set number