Fixmyvw.com

Author Topic: 1Y conrod bearing set number  (Read 1824 times)

April 07, 2019, 11:02:45 pm

thebilgerat

  • Newbie

  • Offline
  • *

  • 8
1Y conrod bearing set number
« on: April 07, 2019, 11:02:45 pm »
Does anyone have a good number for a conrod bearing set for the 1Y?  The parts supplier sent me bearings for an AAZ which do not appear to be the same at all.

Thanks!



Reply #1April 07, 2019, 11:42:18 pm

thebilgerat

  • Newbie

  • Offline
  • *

  • 8
Re: 1Y conrod bearing set number
« Reply #1 on: April 07, 2019, 11:42:18 pm »
So after some searching it seems that the 1.6L diesel conrod bearings are the ones I want.  Are the conrod bearing ends the same diameter as the 1Y?  Or do I need to buy oversize/undersize?  Rods are standard.

Reply #2April 08, 2019, 10:29:04 am

RabbitJockey

  • Veteran

  • Offline
  • ***

  • 5061
  • Personal Text
    America, DUCK YEAH!!!
Re: 1Y conrod bearing set number
« Reply #2 on: April 08, 2019, 10:29:04 am »
are you talking about the small end?
01 Jetta TDI 100% stock daily
81 Rabbit:TDI-M ported head, Frank06 cam, PD intake, hybrid T3 turbo, Renault intercooler, Syl20 11mm pump, light weight fw, and yellow California Clutch clutch kit

Reply #3April 08, 2019, 04:24:20 pm

libbydiesel

  • Global Moderator
  • Veteran

  • Offline
  • *****

  • 3416
Re: 1Y conrod bearing set number
« Reply #3 on: April 08, 2019, 04:24:20 pm »
The big-end journal diameter for the 1.6 and the AAZ is the same.  I don't know about the 1Y.  If it is different from the AAZ then it is different from the 1.6. 

Reply #4April 09, 2019, 02:39:48 pm

thebilgerat

  • Newbie

  • Offline
  • *

  • 8
Re: 1Y conrod bearing set number
« Reply #4 on: April 09, 2019, 02:39:48 pm »
The problem with the AAZ bearings are the notch.  The 1Y has a small style notch while the AAZ notch is large and goes completely to the edge.  The 1Y rod bearing notch does not go to the edge.

The wrist pin bearings I don't need (small end)

 

S-PAutomotive.com