Engine Specific Info and Questions > mTDI Mechanical TDI Conversions
Ahu mtdi knock
Meilleur:
hellos
i have an ahu with a cummins pump 4bt 11mm head tdi.
he is timing at 1mm ip
he has a clacking noise when you give fuel!
what could be the cause?
Sorry I’m français!!
https://youtu.be/3hJ7esUsLZk
libbydiesel:
Cummins 4BTA pumps had 12mm plunger/head assemblies. Because of the larger plunger the fuel is delivered in a shorter injection event so the clatter is more pronounced. When I listened to your engine, though, the steady louder lower frequency knock sounds like a bad injector.
Meilleur:
https://youtu.be/PhnGbwfbBz4
thank you for your answer here is another video.
Envoyé de mon iPhone en utilisant Tapatalk
libbydiesel:
Wind noise makes it a bit hard to hear, but it sounds fine/normal to me in that video.
ORCoaster:
Wind was a bit hard to filter out. I wasn't sure that there was a knocking noise that was abnormal. Maybe a listen with at solid rod from ear to injector will help find any that are louder than the others. I use a breaker bar and that seems to work well enough.
Timing of 1.0 mm? Could a change one way or the other make a slight difference for you?
Navigation
[0] Message Index
[#] Next page
Go to full version