I'm going to be pulling my engine and rebuilding the bottom end, installing my new head and a holset turbo in mid March. As such I will no longer be needing:
AAZ head, was told the engine had 175,000km on it when pulled. When I installed it the engine had almost no oil pressure. Ended up changing the main, rod and im shaft bearings and now I have too much oil pressure (believe an oil gallery is clogged). Anyways the engine runs extremely well other then the oil pressure issues. Here is a vid of it running from a couple months ago
Looking for $150USD for the just head with no valve cover, or coolant flanges
K24 with unknown miles, I believe there was no in and out shaft play and only minor up and down when I installed it but can give a better description when its pulled. I will include the oil feed line and my hacked up drain line for the aaz for $150USD obo. I may or may not have a spare manifold laying around as well.
1.6td injector lines $30USD
I'll have a look at my parts pile and update the thread with whatever else I can find. Like I mentioned earlier I'll be pulling the engine mid march so the parts wont be available until then. I'm in Canada so keep that in mind for shipping quotes.