Is the accessory bracket necessary? - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• Is the accessory bracket necessary? by westcoaster on 31 May, 2016 12:59
• '97 AAZ engine,
  
  The aluminum accessory bracket that holds the alternator, AC compressor and serpentine tensioner that bolts to the water pump.
  
  Is it necessary to provide support for the injector pump or will the injector pump get along just fine without it? Thing is, there is one bolt on the outside of the IP bracket that bolts to the accessory bracket.
  
  I swapped in a double V belt harmonic balancer from a 1.6td, installed the samurai alternator on the turbo side of engine and found a properly sized belt for the water pump. As a result, I don't need the accessory bracket and am looking to pitch it if it's not necessary...
• #1 by RunninWild on 31 May, 2016 15:47
• No you don't need it.
  Where did you find a dual v belt pulley? I have the same swap and Was trying to find one a while back but gave up on it. Would prefer to avoid a serp belt if possible.
• #2 by vanbcguy on 01 Jun, 2016 07:22
• The bolt from the pump bracket to the accessory bracket isn't present on non-AC AAZ cars, the hole on the pump bracket is just empty floating in space. That's how VW made em, you'll be fine.
  
  Sent from my XT1097 using Tapatalk
  
  
• #3 by westcoaster on 01 Jun, 2016 09:53
• Thanks guys,
  
  I pulled my double vbelt off the 1.6TD I had removed from the samurai. Essentially, scavenged parts from the 1.6 to bolt on to the 1.9 to make the step up easier.
  
  
• #4 by RunninWild on 01 Jun, 2016 12:10
• Oh *** your in Surrey eh? I live in Clayton. We should go for a rip in our samurais once I fix my oil pressure!