problems with start after rebuild pump - AAZ

[berton7]

Hello

I need some help from you diesel experts.
My pump was leaking on LDA. I open it and changed main seals.
But I mess up something when putting back together.
Only thing that has 2 options was cam plate(number 3 on picture)

When I start the engine went directly to max RPM!?!?!
Any suggestions what I did wrong?

I put pump back down and and turn the cam plate (number 3 on picture). Now I don't have enough pressure to let the air from pipes. Fuel don't came out from the pipes.

SORRY, cant load picture - try google ''Distributor head'' you will see Distributor head apart with numbers...

SO I must give it one more shot.
Last one with your help I hope

Thanks! Berton

[burn_your_money]

Sounds like you need to adjust the max fuel screw a bit. Turn it in some until you are getting fuel.

[berton7]

after lot of rebuilding post and pictures I rebuild it one more time today and tomorrow we'll see a progress

[retroloose]

Hi Berton did you ever find the problem with your pump after trying to replace Lda seal .

The exact same thing has happend me i thought i put it back together right but it just goes to max revs the minute i start engine.

Jordan