Author Topic: Bosch Injection Pump "Cleaning"  (Read 2422 times)

November 27, 2014, 12:29:47 pm

Sansocal

  • User+

  • Offline
  • *

  • 34
Bosch Injection Pump "Cleaning"
« on: November 27, 2014, 12:29:47 pm »
Is there any way to clean out the internals of a bosch injection pump? I took out the fuel stop solenoid and I saw some crap in the pump... It looked like pine needles.     ???      Yes the filter is new

Reply #1November 27, 2014, 01:48:18 pm

libbydiesel

  • Global Moderator
  • Veteran

  • Offline
  • ****

  • 3399
Re: Bosch Injection Pump "Cleaning"
« Reply #1 on: November 27, 2014, 01:48:18 pm »
Next time you install a new fuel filter, you should fill it with diesel instead of pine needles.   :P

Reply #2November 27, 2014, 07:19:19 pm

TylerDurden

  • Veteran

  • Offline
  • ***

  • 1502
  • Personal Text
    I have a VW problem.
Re: Bosch Injection Pump "Cleaning"
« Reply #2 on: November 27, 2014, 07:19:19 pm »
I took out the fuel stop solenoid and I saw some crap in the pump... It looked like pine needles.     ???      Yes the filter is new

The stop port is pretty small... not likely for large debris to get into the IP or be visible at that port. I'd be interested to see a picture.

The IP can be opened and cleaned, but it's a bit of a fiddly job and easy to screw stuff up.

Reply #3November 29, 2014, 10:14:04 am

bajacalal

  • Guest
Re: Bosch Injection Pump "Cleaning"
« Reply #3 on: November 29, 2014, 10:14:04 am »
https://www.youtube.com/watch?v=iq_ZGh1KEec
That's a tdi but the idea is the same for any diesel.