Caddy, un moment donné vas-tu mettre une pompe de TDI avec l'électronique pour upgrader ton setup? :?: Juste une question comme ça.
sorry , soon in english because now the bed call me! :wink: zzzzzzzzz........[/color=red]"so this is the peugeot td pump body with the 20mm drive shaft"Aloha Caddy, I'm trying to get educated on building myself one of these hybred mech. pumps for a 2001 A4/TDI engine. My interest is to repower my '87 Suzuki Samurai w/ the TDI mated to a Toyota truck trans & t-case. I already have the engine/tranny adapter. The problem is, my engine didn't come w/ the wiring harness, ECU, etc. My engine came from a 2001 automatic beetle, so it has the bigger 11mm pump on it, which is good! My original plans was to keep it electronic & source all the parts(used/new) from the '98 & '99 New Beetle. Those two years(USA) didn't have the IMMOB. & from what I understand the instrument cluster wasn't needed to make it run properly. But have now desided to go the mechanical pump route since I see quite a few post of building these hybrid pumps. My question is, can the larger 20mm drive shaft from the TDI pump fit in a TD that originally had a 17mm one? Is it just a matter of changing out the bearing/bushings? Also, what about the bigger plungers, say the 11mm one into one that has a 8mm. I have two pumps available, any of these worth looking at; (1) from a 2.1L TD 4cyl. winnebagos. From what I understand, it's the same pump used on the peugeots(VE style pump) also. I'm still waiting to hear from the seller to get the Bosch# to see what size pump it has. I believe they had 8mm, so if that could be changed out to the 11mm that woild be good!The other pump is also a VE pump. However, it's from a cummins 6cyl., Bosch#0-460-426-184. The six digit says that this pump has a 12mm plunger. Just wondering if the head could be changed to the vw 4 head. If it could, I think this pump would be able to give the highest performance for a TDI. I'll try to post a picture of it. Please, any comments, suggestion will be greatly appreciated!!!!!!Thanks & aloha! ....renny