Fixmyvw.com

Author Topic: mk4 pully, hub set on rover pump  (Read 1641 times)

April 09, 2014, 08:25:12 am

CRSMP5

  • Guest
mk4 pully, hub set on rover pump
« on: April 09, 2014, 08:25:12 am »
Mk4 hub, pully set on rover pump info

Well with current tdi m caddy project, a mk4 style hub and pully was used...

The interesting... Mk4 pump has timming mark behind hub for #1 and key way alignment... Also body has casting in it...

Rover pump has casting too... And a 2 digit number... Happens to be close nuff to call #1...

2nd interesting part... Those 3 bolts vw use hit pump body and prevent things from turning... Pay attention to this guys... I took belt off 3 times trying to figure out wtf... Stuff stopped turning by hand.... Sadly... Lines up with #4 ex valve going down like things trying to hit...

I need to get someone to build pump head to block brackets... I need to fab 3 and too point to make one to copy and get them machined... Under fuel lines to the pump bracket...



Reply #1April 09, 2014, 09:59:56 am

vanbcguy

  • Administrator
  • Veteran

  • Offline
  • *****

  • 2831
  • Personal Text
    Vancouver, BC
Re:
« Reply #1 on: April 09, 2014, 09:59:56 am »
I actually trimmed up a set of bolts to fit, I never had the original ones. Actually makes me happy to know they don't fit - I bought proper factory bolts for virtually everything else!

I would buy one of those brackets in a heartbeat if you make them. Dibs!

Sent from my HTC One XL using Tapatalk
Bryn

1994 Jetta - AHU M-TDI - Jezebel Jetta
2004 Jetta Wagon - 1.8T - Blitzen

Reply #2May 27, 2014, 03:38:24 am

ToddA1

  • Veteran

  • Offline
  • ***

  • 432
Re: mk4 pully, hub set on rover pump
« Reply #2 on: May 27, 2014, 03:38:24 am »

The interesting... Mk4 pump has timming mark behind hub for #1 and key way alignment... Also body has casting in it...

Rover pump has casting too... And a 2 digit number... Happens to be close nuff to call #1...



What are the chances that you took pics of these?  The marks are for #1, not TDC?

-Todd

Reply #3May 27, 2014, 11:42:52 am

CRSMP5

  • Guest
Re: mk4 pully, hub set on rover pump
« Reply #3 on: May 27, 2014, 11:42:52 am »
Very good... Still no internet access to get from camera to web.... And 10gig limited sat service not acceptable to me... I have none vs $100/mo for that...

So may die with me....

Reply #4July 02, 2014, 09:52:38 am

CRSMP5

  • Guest
Re: mk4 pully, hub set on rover pump
« Reply #4 on: July 02, 2014, 09:52:38 am »
My pully i had made up

Split stock one, after holes machined in for plate, then split, slots added to plate for 3 teeth of adj incase i am tooth off on belt install...

Reply #5July 03, 2014, 12:23:31 am

GEE-BEE

  • Veteran

  • Offline
  • ***

  • 1604
  • Personal Text
    1981 with South African front end ,42 k original
Re: mk4 pully, hub set on rover pump
« Reply #5 on: July 03, 2014, 12:23:31 am »
Thanx for the info..

 Iam sending out for a new alh sprocket and and ahu pump bracket to be machined before paowder coat of all the brackets from a long time vanagon hose customer..

Iam doing a G60 heads on both ahu builds

GB
1.9 AAZ, CHD 5spd with Peloquin
KO4/KO3 Hybrid turbo
Giles Pump OHC
Complete Techtonics 2'5 S/S DP and Exhaust
Coilovers, MKII Pedal Swap,G60 BRAKES
MK1 JETTA DASH
675MM 16V radiator (MKII) PASSAT DUAL FAN
42K original miles , South African Front End
15x6 Le Casletts 195-45-15

 

S-PAutomotive.com