Recently re-sealed 1.6d injection pump. Dunno by who, but it's very clean and has a dab of yellow paint on each fastener.
Complete 1.6d mechanical head, with questionable valve cover. i'm told that this is a rebuilt head that was installed not very many miles before the bottom end lost compression.
Toilet bowl exhaust manifold w/o any cracks.
NA intake manifold w/ cover w/ clips. and snorkel. oval snorkel type.
toilet bowl downpipe and clamps. looks like a recent replacement - aluminized steel with very little rust.
Make offer.
had some nibbles on the head but it is not sold yet.
I took it over to my machinst and he took out his very expensive straight edge, took off the protective cover, and we determined that it needs to be machined about 5 thou.
I'm willing to have my shop do that, or any machine shop should be able to do it. my shop is pretty sure they won't have to even take out the valves (just the cam).
Head is sold.
1.5D oil pump available.
How much for the toilet bowl downpipe shipped to 75234?
How much for the toilet bowl downpipe shipped to 75234?
Not much!
It's currently still attached to the tail section -- not clamped or welded just still kinda stuck there. just need to pull it out.
We've got a band of rain storms going through and i don't have a garage. It MIGHT not rain tomorrow. Or it might be saturday or monday before i get it pulled.
Hopefully tomorrow. Will let you know.
Just extracted. Calipers suggest this is 1.5" diameter pipe.
I also have the 'gasket' ring and clamps.
And the heat shield, which has been hot tanked and media blasted.
Make me an offer?