-
Fittings for custom TDi/AAZ oil drain. by bbob203 on 18 Nov, 2013 04:09
-
These look to be the same size as the factory fittings. Posting the think for myself and for others.
http://www.ebay.com/itm/Turbo-Water-Pipe-M16x1-5mm-Garrett-T3-TB03-SAAB-VOLVO-Nissan-R31-R33-1-2-Hose-/380768712813?pt=Motors_Car_Truck_Parts_Accessories&hash=item58a795786d&vxp=mtr -
#1 by theman53 on 18 Nov, 2013 05:08
-
wonder if that is the same as the IP banjo?
-
#2 by burn_your_money on 18 Nov, 2013 05:45
-
wonder if that is the same as the IP banjo?
IP banjo is the same as the oil feed line on AAZ/AHU/1Z engines. -
#3 by stewardc on 20 Nov, 2013 05:37
-
Why use a banjo at all? I converted mine to AN fittings. MUCH nicer.
-
#4 by bbob203 on 20 Nov, 2013 05:55
-
I was thinking this may work for the DRAIN banjo fitting on the back of the block but i think its to small.
-
#5 by stewardc on 20 Nov, 2013 06:54
-
Once again, why use a banjo on the drain??? Use an AN hose.
-
#6 by stewardc on 25 Nov, 2013 04:01
-
Here are the parts you need.
