-
WTB Late 1.6 Metal Injection Lines from ECOdiesel or Altitude Comp Pump
by
libbydiesel
on 05 Oct, 2013 14:03
-
Just like the title says I would like to get a couple/few sets of metal injection lines either from an ECOdiesel or a vehicle equipped with the altitude compensating injection pump. Please PM if you have some you would like to sell and let me know how much you are asking shipped to 86001. Thanks.
-
#1
by
CRSMP5
on 05 Oct, 2013 14:20
-
eco had na style pumps.. the na got the turbo style pumps...
-
#2
by
bbob203
on 05 Oct, 2013 14:42
-
but the eco still had the turbo style lines.
-
#3
by
libbydiesel
on 05 Oct, 2013 16:15
-
The lines were the same for either ECO or alt compensating pump. They are different from the earlier lines because they fit the long delivery valves.
-
#4
by
CRSMP5
on 05 Oct, 2013 23:23
-
i know the valves different... but i cannot rember if eco had bent lines or not.. just they had na style pump..
-
#5
by
billybobf
on 05 Oct, 2013 23:59
-
im just glad I saw this post, I have an 89 jetta with the alt comp pump and I was considering buying a set of lines and now I will look and think before I buy them.
-
#6
by
libbydiesel
on 06 Oct, 2013 13:03
-
Bbob, ETKA and I all agree that the ECO and alt compensating pump equipped vehicles imported to the USA got the same lines with the same bends to #1 and #2.
-
#7
by
bbob203
on 06 Oct, 2013 13:27
-
Yep because I had to swap out the delivery valves when I installed the 85 aneroid pump onto my Eco motor.
-
#8
by
xsp2467
on 07 Oct, 2013 18:56
-
I have a set of IP lines for a 1.6td. $80 shipped
The top set of lines is for a vanagon 1.6 euro engine, the bottom ones are normal 1.6td.
-
#9
by
libbydiesel
on 07 Oct, 2013 21:38
-
The JX had the short delivery valves and so those lines will not fit.
The lower set of lines are early non-turbo lines which fit the non-aneroid pump with short delivery valves and so also will not fit.