Engine Specific Info and Questions > Diesel Swaps

Ran my Polo m-tdi up the drag strip :) VIDEO

(1/2) > >>

jimbobpolo:
Finally got to run my polo m-tdi 1z conversion on the drag strip last weekend :)
Track: Santa pod raceway UK
ambient air temp: 30•c
Tyres: Yokohama a032r cut slicks
Quickest 1/4 mile was 15.4 secs @92.10 mph :)
Wound the WG on my k24 shut to 25psi and wound the pump up to a stupid amount of fuel!

http://i20.photobucket.com/albums/b211/james_g40/54A895A4-2E7C-4CE2-8FA0-64959BEDB1E8-4254-0000021E00D708FE.mp4

http://i20.photobucket.com/albums/b211/james_g40/BA0FF404-2FB4-4183-B750-8A0F201BF235-4254-0000021DE23991BA.mp4

smokeinmirrors:
No luck with the videos - looks like the album is set to private?

8v-of-fury:
Works for me ;)

snakemaster:
looking good , and pulls well , what nozles you running , not to much black smoke for draging eather

jimbobpolo:
It's got some .216 t4 nozzles on original 1z injectors, smokes quite a lot when driving around town due to the lag from the k24 :( but fine for the drag strip! Gets people talking! Haha
All the power seems 2500rpm+ which is fine for motorway driving but useless on the drive to work etc. but when it pulls it pulls very well, wheel spin in second and top of third is interesting to tame in the dry!
It's almost impossible to accelerate hard in the wet!!

Navigation

[0] Message Index

[#] Next page