gotta swap them for the lines to line up..
I kept the long delivery valves and bent the lines to fit on both of my personal mTDIs. It's easy on the ALH and a bit harder but not too bad on the AHU/1Z. Otherwise, a set of TDI or 1.6 delivery valves can be used.
Judging by the fact that I have had 1.6 valves in my rover pump since installation.. id say no. Lol.
Yhe rover ones are too long. Ahu ot alh ones will work fine.
Judging by the fact that I have had 1.6 valves in my rover pump since installation.. id say no. Lol.
What are you saying no to?
The last question asked.. I was answering.
It is not DI specific.
I agree, either TDI or IDI delivery valves will work fine on an mTDI.
Great... that makes it easier. My Landy pump has a cap at the top of the aneroid. I'm guessing my adjustment screw is hiding under that?
Now onto the seal kit. Any idea which I need? Is there one kit that covers all seals in the body and LDA or will I need to piece a kit together?
If the latter, I'm thinking I'll need the DGK121, and the LDA o-ring (1 460 210 347). Does the diaphragm have a part number?
-Todd