Author Topic: FS 1.5l pistons & precups NOS  (Read 4596 times)

April 07, 2013, 02:37:50 pm

RustyCaddy

  • Veteran

  • Offline
  • ***

  • 389
FS 1.5l pistons & precups NOS
« on: April 07, 2013, 02:37:50 pm »
Thought i might rebuild a 1.5l motor but plans have changed.

Set of 0.50mm over, made in Germany Mahle pistons, w/ rings, pins and circlips.  Some light oxidation in spots but should buff off.   Asking $250.00 USD shipped in continental USA.  Maybe last i'll ever see.

Also, 4 new precups to fit 1.5l (approx. 30.5mm diameter) but one is missing the ball bearing and another is miss labeled (?); might fit turbo head but made for NA (no triangles). Best offer.

Approx. 35,000 mile on rebuild 1.5l head, forwarned that it came off a high compression 1.5/1.6 hybrid that burned mostly biodiesel and veg oil, with oil return reducer, looks straight but i dont have machnists straight edge so selling as a core, no camshaft...best offer.

Pictures available on request.

« Last Edit: April 14, 2013, 04:03:52 pm by RustyCaddy »



Reply #1April 14, 2013, 04:04:58 pm

RustyCaddy

  • Veteran

  • Offline
  • ***

  • 389
Re: FS 1.5l pistons & precups NOS
« Reply #1 on: April 14, 2013, 04:04:58 pm »
ttt

Reply #2April 21, 2013, 01:04:16 pm

RustyCaddy

  • Veteran

  • Offline
  • ***

  • 389
Re: FS 1.5l pistons & precups NOS
« Reply #2 on: April 21, 2013, 01:04:16 pm »
ttt

Reply #3April 28, 2013, 01:50:38 pm

RustyCaddy

  • Veteran

  • Offline
  • ***

  • 389
Re: FS 1.5l pistons & precups NOS
« Reply #3 on: April 28, 2013, 01:50:38 pm »
ttt

Reply #4May 18, 2013, 12:46:44 pm

RustyCaddy

  • Veteran

  • Offline
  • ***

  • 389
Re: FS 1.5l pistons & precups NOS
« Reply #4 on: May 18, 2013, 12:46:44 pm »
btt

Reply #5June 02, 2013, 12:23:17 pm

RustyCaddy

  • Veteran

  • Offline
  • ***

  • 389
Re: FS 1.5l pistons & precups NOS
« Reply #5 on: June 02, 2013, 12:23:17 pm »
ttt

Reply #6June 03, 2013, 09:53:37 pm

R.O.R-2.0

  • Veteran

  • Offline
  • ***

  • 7335
  • Personal Text
    Pacific Northwest - Oregon - USA
Re: FS 1.5l pistons & precups NOS
« Reply #6 on: June 03, 2013, 09:53:37 pm »
Thought i might rebuild a 1.5l motor but plans have changed.

Set of 0.50mm over, made in Germany Mahle pistons, w/ rings, pins and circlips.  Some light oxidation in spots but should buff off.   Asking $250.00 USD shipped in continental USA.  Maybe last i'll ever see.

Also, 4 new precups to fit 1.5l (approx. 30.5mm diameter) but one is missing the ball bearing and another is miss labeled (?); might fit turbo head but made for NA (no triangles). Best offer.

Approx. 35,000 mile on rebuild 1.5l head, forwarned that it came off a high compression 1.5/1.6 hybrid that burned mostly biodiesel and veg oil, with oil return reducer, looks straight but i dont have machnists straight edge so selling as a core, no camshaft...best offer.

Pictures available on request.



if it has an oil return reducer INSTALLED IN THE HEAD, then it is a 1.6 head that was used on a 1.5D engine..

or do you mean that the oil return reducer for the block is included with the head?

the 1.5 head has a very small oil return passage already.. the 1.6 head has the bigger oil (would need reducers installed if not being used on proper block) return passages.
92 Jetta GLI - Black, 1.6D w/ GT2056V turbo..
86 GTI - 4 Door, Med Twilight Gray, Tow Machine..
86 Audi Coupe GT - Tornado Red, All Stock.. WRECKED.
89 Toyota 4Runner - Dark Grey Metallic, LIFTED!

Turbo: exhaust gasses go into the turbocharger and spin it, witchcraft happens and you go faster.

Reply #7June 04, 2013, 07:58:26 am

RustyCaddy

  • Veteran

  • Offline
  • ***

  • 389
Re: FS 1.5l pistons & precups NOS
« Reply #7 on: June 04, 2013, 07:58:26 am »
The head has the small oil return.  The reducer came from the VWparts forums sponsor.