Quieting the intake? - page 3 - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• #30 by burn_your_money on 26 Apr, 2014 16:46
• So the dryer hose is your actual intake hose, post filter correct?
• #31 by Gizmoman on 26 Apr, 2014 17:13
• Quote from: burn_your_money on 26 Apr, 2014 16:46

  So the dryer hose is your actual intake hose, post filter correct?
  

  Considering the direction of air-flow, I'd call it pre-filter
  
  Here's a shot of the intake HARD piping from the filter to the turbo inlet
  
  
  
  Here's a shot down the RH pillar through the vent. You can make out the dryer vent tube inside the collum
  
  
• #32 by burn_your_money on 27 Apr, 2014 05:25
• That makes more sense. Thanks Jim.
• #33 by GEE-BEE on 30 Apr, 2014 16:03
• I can make this for you with smooth cuffs
  
  http://www.aircraftspruce.com/catalog/appages/sceet.php?clickkey=5261
  
  advise your i.d. and length
  
  3' i.d. is 3.50 per inch
  
  http://www.beechtalk.com/forums/viewtopic.php?f=37&t=90998&view=unread#unread
• #34 by RabbitJockey on 30 Apr, 2014 17:29
• 
• #35 by GEE-BEE on 30 Apr, 2014 18:07
• 85 % of my work is aircraft gaskets , hoses and ducts
  
  I support 465 different models of aircraft, I do the silicone automotive for ***s and giggles
  
  The ducati coolant hoses allows me to get a new model to tool for every two years..
  
  If you want the best quality, let me know
  
  My silicone ticco hoses kits sell very well, and are shown above..
  
  GB
  
  Name three people that were shot in the back of the head
  
  1. President Lincoln
  2.President Kennedy
  3.The Guy sitting in front of Pee-Wee at the adult theatre
• #36 by Gizmoman on 30 Apr, 2014 18:12
• Quote from: GEE-BEE on 30 Apr, 2014 16:03

  I can make this for you with smooth cuffs
  
  http://www.aircraftspruce.com/catalog/appages/sceet.php?clickkey=5261
  
  advise your i.d. and length
  
  3' i.d. is 3.50 per inch
  
  http://www.beechtalk.com/forums/viewtopic.php?f=37&t=90998&view=unread#unread
  

  
  Thanks for the offer, The aluminum drier vent pipe is working just dandy and I think the rough ID helps quiet things a bit.
  
  

  Quote from: RabbitJockey on 30 Apr, 2014 17:29

  
  

  
  I don't get it. However, I've shot skeet, sometimes even two, but never three. Oh, and I believe that guy's been caught shooting something as well (sorry)
  
  Gee-Bee, ironically, I was posting this at the same time
• #37 by GEE-BEE on 30 Apr, 2014 21:15
• Its spelled Sceet
  
  Its a 2 ply silicone with one wire fiberglass reinforcement..
  
  Used in heater and intake air applications..
  
  GB
• #38 by Gizmoman on 01 May, 2014 05:26
• Quote from: GEE-BEE on 30 Apr, 2014 21:15

  Its spelled Sceet
  
  Its a 2 ply silicone with one wire fiberglass reinforcement..
  
  Used in heater and intake air applications..
  
  GB
  

  
  Thanks for the explanation and good to know what you can do. I design separation machinery for the recycling industry and I'll file this info in my head for a possible solution of some sort.
• #39 by RabbitJockey on 01 May, 2014 05:55
• Quote from: GEE-BEE on 30 Apr, 2014 18:07

  Name three people that were shot in the back of the head
  
  1. President Lincoln
  2.President Kennedy
  3.The Guy sitting in front of Pee-Wee at the adult theatre
  

  hahaha, thats one of my favorite jokes
  
  and skeet was something dave chappelle used to say frequently, its meaning is perverse