Author Topic: Pre chambers,, (Read 2204 times)

TUFFY · « **on:** March 26, 2013, 03:38:23 pm »

Hello, Is there any difference in factory turbo pre chambers compared to the NA pre chambers? I am not sure what most of you guys call them lol.

libbydiesel · « **Reply #1 on:** March 26, 2013, 05:08:30 pm »

Yes, they are a different size.

TUFFY · « **Reply #2 on:** March 26, 2013, 05:24:06 pm »

Can turbo ones be installed in a NA head?

libbydiesel · « **Reply #3 on:** March 26, 2013, 05:26:53 pm »

If memory serves, the TD ones are slightly smaller in diameter than the NA ones and so, no, they will not work in an n/a head. The n/a ones could be installed in a TD head if it is machined to fit them. I could have that backwards, tho.

theman53 · « **Reply #4 on:** March 26, 2013, 05:28:00 pm »

no. The 1.5L and 1.6 TD are 30mm across the face. The N/A prechambers are 32mm across the face. Being a press fit there is no way to install them easily.

Edit: libby was in there the same time I was. Carry on.

TUFFY · « **Reply #5 on:** March 26, 2013, 06:52:28 pm »

OK, I am stuck with NA ones then. Would there be much power difference on a high boost lots of fuel 1.6 between the turbo and NA chambers?

libbydiesel · « **Reply #6 on:** March 26, 2013, 08:31:05 pm »

No. There wouldn't be any difference at all.

CRSMP5 · « **Reply #7 on:** March 26, 2013, 10:01:22 pm »

srgtlord · « **Reply #8 on:** March 26, 2013, 11:05:15 pm »

HAHAHAHAHAHHAAHHAHAHHAHAHAHAHAHAHAHHAAHHA

Author Topic: Pre chambers,, (Read 2204 times)

TUFFY

Pre chambers,,

libbydiesel

Re: Pre chambers,,

TUFFY

Re: Pre chambers,,

libbydiesel

Re: Pre chambers,,

theman53

Re: Pre chambers,,

TUFFY

Re: Pre chambers,,

libbydiesel

Re: Pre chambers,,

CRSMP5

Re: Pre chambers,,

srgtlord

Re: Pre chambers,,