-
vane and diaphragm vac pumps, vw and audi oil filter housing, N/A I.P. w/lines.
by
billybobf
on 01 Jul, 2012 08:48
-
First off, Id rather ship within the states.
I have a both vacuum pumps, both oil filter housings. I have an injection pump and, 7 hardlines, four injectors,
I tore down an engine, the head parts are gone. I still have the block, but that will be local only.
Id say $40 for diaphragm pump, $70 for vane. $90 for IP, $50 for injectors, $25 for lines. BOSCH rebuild kit with unknown 17mm input seal $25.
willing to make package deals.
Once again, Id rather ship in the states. Also, prices are OBO. have a set of .5 over (.020?) they have 3k miles on them, they were in an 11mm block that cracked. $60 bucks
located in florence oregon, might be able to get them to eugene, coos bay or with help portland
-
#1
by
8v-of-fury
on 01 Jul, 2012 09:17
-
Sent a PM regarding our previous arrangement.
-
#2
by
bbob203
on 01 Jul, 2012 12:12
-
does the ip work?
-
#3
by
theman53
on 01 Jul, 2012 12:19
-
What brand pistons do you have? If they are not prothe I call dibs.
-
#4
by
billybobf
on 01 Jul, 2012 20:39
-
I believe they are mahle or whatever, as that was the popular choice of the shop who built the engine, as well as that is the box I got them in.
I will try to post up some pictures. IP works, but gotta talk to 8v
-
#5
by
ORCoaster
on 01 Jul, 2012 21:08
-
Might I ask what kind of injectors they are? How many bar? 135s? Seems I should have asked you about the Pop injector when I grabbed the head. That would have prompted a discussion on the injectors. I know you mentioned the arrangement with 8V on the pump and lines.
And yes would be willing to run parts north for you if need be.
Working on the head this week. Needed 4 exhaust valves and the guides pushed in by a machine shop. Should have it back tomorrow hopefully.
Thanks, DAS
-
#6
by
theman53
on 02 Jul, 2012 04:40
-
I believe they are mahle or whatever, as that was the popular choice of the shop who built the engine, as well as that is the box I got them in.
I will try to post up some pictures. IP works, but gotta talk to 8v
I need to either buy these or order my stuff today from autohaus...please let me know for sure ASAP. If they are MAHLE let me know where they were made. I will send Paypal or whatever works for you to get them out ASAP. I will send you a PM with my contact info so you can call anytime. Thanks Lucas><>
-
#7
by
billybobf
on 02 Jul, 2012 22:13
-
says made in brazil on the box. but I am not positive they are out of THAT box
-
#8
by
theman53
on 03 Jul, 2012 03:13
-
Send them.
-
#9
by
billybobf
on 11 Jul, 2012 21:50
-
pistons are still available, they are N/A pistons just incase the fact that they came out of an 11mm bolt block didn't get that out there
everything but the injectors, hardlines, and IP are still available. make offers as I could work with you on the prices
-
#10
by
theman53
on 12 Jul, 2012 06:52
-
I have them and will ship them from my place as to avoid any more shipping charges.
-
#11
by
billybobf
on 24 Sep, 2012 18:00
-
bump, everything is still available except the head, and the like new pistons.
still have IP, injectors, hardlines, rebuild kit.
block, crank, rods,
valve cover, oil pan,
intake and exhaust manifolds.
both styles of vacuum pumps.
all prices are OBO, package deal SOON and LOCAL gets it the cheapest... located in florence oregon, going to eugene on thursday. Im not on here so EMAIL is best I think if it will let you through the forums. if not I think a PM might send me an email. posting on here is not likely to get a reply
also have a nitro power tmaxx, lots of extras but still the 2.2 motor I think? only a two channel radio but reverse does work on the tranny, just need a three channel radio.
-
#12
by
ORCoaster
on 25 Sep, 2012 20:59
-
Local guy helps out, decided to buy now fix later. Thanks for keeping me busy, busier?
-
#13
by
billybobf
on 10 Oct, 2012 00:05
-
now you just gotta come get it....
tmaxx is still for sale, lol