Fixmyvw.com
« previous next »
Pages: 1 2 3 [4]

Author Topic: Tuning potential of Audi 2.0 TD  (Read 12938 times)

Reply #45December 19, 2012, 03:30:54 pm

Alcaid

  • Veteran
  • Offline
  • ***
  • 549
Re: Tuning potential of Audi 2.0 TD
« Reply #45 on: December 19, 2012, 03:30:54 pm »
Yep, revs is the key. Still have not seen a dyno sheet for a 200hp 9mm build?
Logged
'03 VW Golf PD130 4Motion Highline
'10 VW Passat 1.6TDI Highline
'83 VW Jetta 1.6TD, 11mm pump, H-beam rods, girdle, fully reworked AAZ head +++ Going Compound ;)
Reply #46December 19, 2012, 03:51:50 pm

RabbitJockey

  • Veteran
  • Offline
  • ***
  • 5064
  • Personal Text
    America, DUCK YEAH!!!
Re: Tuning potential of Audi 2.0 TD
« Reply #46 on: December 19, 2012, 03:51:50 pm »
http://www.vwdiesel.net/forum/index.php?topic=11698.0

daves franken engine, he dynoed 195whp, which would be atleast 200bhp, t3/t4 not sure what trim compressor, i would guess a 50 or super 50 but it was a stage 3 turbine wheel with .63 a/r exhaust housing, absolutely huge, yet he managed to have over 30psi by 4k even with the small pump.  i think i could live with that slow spooling setup if it pulled real sweet from 4k-6k, i drive na right now anyway whats the difference haha, especially since his off boost performance would have still been that of a 1.6 with a ported head and giles pump.
Logged
01 Jetta TDI 100% stock daily
81 Rabbit:TDI-M ported head, Frank06 cam, PD intake, hybrid T3 turbo, Renault intercooler, Syl20 11mm pump, light weight fw, and yellow California Clutch clutch kit
Reply #47December 20, 2012, 04:01:04 pm

Alcaid

  • Veteran
  • Offline
  • ***
  • 549
Re: Tuning potential of Audi 2.0 TD
« Reply #47 on: December 20, 2012, 04:01:04 pm »
There was never a dyno sheet posted on that one? Just a screen shot from a no-name dyno IIRC?
Logged
'03 VW Golf PD130 4Motion Highline
'10 VW Passat 1.6TDI Highline
'83 VW Jetta 1.6TD, 11mm pump, H-beam rods, girdle, fully reworked AAZ head +++ Going Compound ;)
Pages: 1 2 3 [4]
« previous next »