for sale k24/k26

[andy2]

I have a k24/k26 that I wouldn't mind parting with.I built it about 4 yrs ago and intended to use it but never did.There is a couple pics of it in the links below.

http://andy2turbo.multiply.com/photos/album/12#photo=1
http://andy2turbo.multiply.com/photos/album/12#photo=2
http://andy2turbo.multiply.com/photos/album/12#photo=3

It isn't rebuilt just reconditioned.It has ceramic coated turbine housing that was bored out to accept the k26 turbine wheel.The k26 compressor section is mounted to the k24 center housing.The wastegate is stock and in good working order.I made a spacer out of an old exh manifold to clearance the k26 compressor housing from the intake manifold.The turbine outlet flange holes were drilled and tapped for 10mm as we were planing on hanging another turbo form it.The 8 capscrews and spacer are included with this as well.

This turbo is obviously not a bolt on and would require a modified oil drain pipe hose due to the exh spacer.The compressor inlet and outlet are also different sizes that the k24.

looking $200 + shipping

[R.O.R-2.0]

is this a K26 center section inside K24 housings?

or is it a K26 cold side on a K24 turbo?

[1.9aaz]

cash today for 200 shipped to Pa 18360

[1.9aaz]

On second thought.... i'll split shipping with you if your willing

[andy2]

is this a K26 center section inside K24 housings?

or is it a K26 cold side on a K24 turbo?

This is k26 wheels with a k24 turbine housing bored out to accept the bigger k26 turbine wheel.It has a k24 center section not the k26 water cooled one.

[1.9aaz]

Hi Andy,

Should I take your lack of response as a "not interested"? No hard feelings, just wanting to know if I should bid for one on ebay.

Andrew

[R.O.R-2.0]

is this a K26 center section inside K24 housings?

or is it a K26 cold side on a K24 turbo?

This is k26 wheels with a k24 turbine housing bored out to accept the bigger k26 turbine wheel.It has a k24 center section not the k26 water cooled one.

ok, so it was built right then..

good deal!!

[andy2]

Hi Andy,

Should I take your lack of response as a "not interested"? No hard feelings, just wanting to know if I should bid for one on ebay.

Andrew

As long as the shipping isn't too much then I'm sure we could work a deal.I can get a shipping quote likely tomarrow.

[1.9aaz]

Thanks! I look forward to hearing from you.

[CrazyAndy]

did 1.9aaz take it already?


Is the K26 compressor inlet O.D. larger than a K24?

[andy2]

Yes,I will hopefully be shipping it out to him today.

I'm pretty sure that the compressor inlet OD is smaller for some reason.

[andy2]

SOLD

[R.O.R-2.0]

Yes,I will hopefully be shipping it out to him today.

I'm pretty sure that the compressor inlet OD is smaller for some reason.

Compressor inlet is SMALLER on the 26. the compressor wheel is MUCH larger, but the inlet is SMALLER for some reason..

[1.9aaz]

Thanks Andrew!

Cant wait to post pics and and how she performs.

Andrew

[CrazyAndy]

Yes,I will hopefully be shipping it out to him today.

I'm pretty sure that the compressor inlet OD is smaller for some reason.

Okay, no prob.  So inlet OD is smaller, wierd.  Have fun w/ that turbo for me!

So 2 other guys her named Andrew too?  Crazy!