Author Topic: Giles' contact info  (Read 53076 times)

Reply #15January 25, 2008, 11:55:03 am

BejamminR

  • Junior

  • Offline
  • **

  • 89
Re: Giles' contact info
« Reply #15 on: January 25, 2008, 11:55:03 am »
Quote from: "haybayian"
Hi Giles,
1) How much HP and torque (approximately) one should expect from a completely remaned  stock AAZ equiped with your moded VE pumps and a Garrett T3?

2) Are the pumps rebuilt by your shop B100 compatible?


Philippe has already gotten in touch with us and gotten his pump done. We're looking forward to hearing how that project turns out, too.  :)
As for the questions:
1) Depends on boost pressures, intercooler, etc. Charging system will make the results quite variable.
2) All of our rebuilt pumps are fully B100 compatible - however, there is no manufacturer warranty on them. Rather than re-typing all of the reasoning for it, I'll link to a previous thread talking about biodiesel / manufacturer support / "caveat emptor" (buyer beware) on biodiesel stuff.

B100 Topic Linkage!

Reply #16January 25, 2008, 04:36:19 pm

haybayian

  • Junior

  • Offline
  • **

  • 155
Re: Giles' contact info
« Reply #16 on: January 25, 2008, 04:36:19 pm »
Quote from: "BejamminR"
Quote from: "haybayian"
Hi Giles,
1) How much HP and torque (approximately) one should expect from a completely remaned  stock AAZ equiped with your moded VE pumps and a Garrett T3?

2) Are the pumps rebuilt by your shop B100 compatible?


Philippe has already gotten in touch with us and gotten his pump done. We're looking forward to hearing how that project turns out, too.  :)
As for the questions:
1) Depends on boost pressures, intercooler, etc. Charging system will make the results quite variable.
2) All of our rebuilt pumps are fully B100 compatible - however, there is no manufacturer warranty on them. Rather than re-typing all of the reasoning for it, I'll link to a previous thread talking about biodiesel / manufacturer support / "caveat emptor" (buyer beware) on biodiesel stuff.

B100 Topic Linkage!


Thanks for responding.
Take care.
Philippe
Keep it simple if you can.

Reply #17April 22, 2008, 09:21:41 am

stewardc

  • Guest
Giles' contact info
« Reply #17 on: April 22, 2008, 09:21:41 am »
Did you ever make a sticker/decal so we can all advertise for you?

Reply #18April 22, 2008, 10:36:41 am

BejamminR

  • Junior

  • Offline
  • **

  • 89
Giles' contact info
« Reply #18 on: April 22, 2008, 10:36:41 am »
Giles hasn't got the stickers yet, but they are in progress.

In this case, "In Progress" means "We think we should have them, but haven't gotten them made yet"!  8)

We would like to have some stickers / decals as well - we've talked about bumper stickers and window stickers (We're talking about them as we speak)
As soon as we get'em made, I'll post about it here. We'll likely start sending them out along with pumps (and to the folks who already have pumps).

What kind of stuff would you like to see on the sticker? Any particular tagline, graphics, whatever?

Let me know and I'll see if I can get it included in a design!

Reply #19April 22, 2008, 11:36:19 am

stewardc

  • Guest
Giles' contact info
« Reply #19 on: April 22, 2008, 11:36:19 am »
Quote from: "BejamminR"

What kind of stuff would you like to see on the sticker? Any particular tagline, graphics, whatever?

Let me know and I'll see if I can get it included in a design!


Just do this.


Reply #20April 22, 2008, 11:52:45 am

BejamminR

  • Junior

  • Offline
  • **

  • 89
Stickers...
« Reply #20 on: April 22, 2008, 11:52:45 am »
Quote from: "stewardc"
Quote from: "BejamminR"

What kind of stuff would you like to see on the sticker? Any particular tagline, graphics, whatever?

Let me know and I'll see if I can get it included in a design!


Just do this.

<PDI>


Hahaha. You may (or may not) be surprised to know that this was in fact our plan.  :lol:

I'll start pelting Giles with spitballs in order to encourage him to procure these stickers.  :wink:

Reply #21April 22, 2008, 09:36:33 pm

Dr. Diesel

  • Authorized Vendor
  • Veteran

  • Offline
  • ***

  • 1341
Giles' contact info
« Reply #21 on: April 22, 2008, 09:36:33 pm »
and two large magnetic ones to put on the side of my rabbit in the autocross races!
I repair, maintain and modify VW's and BMW's.
Good work done at affordable rates. Welding and fabricating, too.
Performance Diesel Injection's Super Pump: gotta have one!

Reply #22April 22, 2008, 09:51:39 pm

BejamminR

  • Junior

  • Offline
  • **

  • 89
Giles' contact info
« Reply #22 on: April 22, 2008, 09:51:39 pm »
That's a really good idea, Dr. Diesel. I'll have to see if we can do some bumper-sticker-sized magnets too!

Reply #23April 23, 2008, 01:06:23 pm

TedV

  • Junior

  • Offline
  • **

  • 182
Giles' contact info
« Reply #23 on: April 23, 2008, 01:06:23 pm »
Add another happy customer to the list.  Great work and excelent to deal with.

I'm torn about getting some decals to put on while autocrossing.  I had LOTS of folks interested in the diesel, but I almost don't want my competition knowing what I did to make it fast.   :lol:

thanks y'all

Reply #24April 23, 2008, 01:13:50 pm

BejamminR

  • Junior

  • Offline
  • **

  • 89
Giles' contact info
« Reply #24 on: April 23, 2008, 01:13:50 pm »
Hahaha.

Well Ted, I guess that from where we stand, it's a good problem for you to have. 8)

And with that in mind, you had to do a lot of additional work to your setup in order to be able to make use of the extreme performance that we provided in your case. So the barrier to entry for your competition is still set reasonably high.  :wink:

Reply #25May 07, 2008, 02:18:14 pm

stewardc

  • Guest
Giles' contact info
« Reply #25 on: May 07, 2008, 02:18:14 pm »
This is the front of my abused toolbox.


Reply #26May 14, 2008, 12:09:09 am

im_n2_vws

  • User+

  • Offline
  • *

  • 23
price on NA injection pump?
« Reply #26 on: May 14, 2008, 12:09:09 am »
How much for an 1.6 NA injector pump with your normal mods for a street car? In US dollars please or could someone convert CA price over to US dollars? Thanks,

Danny
68 Beetle,69 type 3 squareback
92 Jetta GL 8v, 91 Jetta GL n/a diesel,91 Jetta GL Carat,88 Jetta GL parts car
70 railbuggy (woodsbuggy)
04 Chevy Silverado / 18' carhauler

Reply #27June 04, 2008, 09:11:57 pm

Giles@PerformanceDiesel

  • Authorized Vendor
  • Junior

  • Offline
  • **

  • 222
    • http://www.performancediesel.ca
Prices
« Reply #27 on: June 04, 2008, 09:11:57 pm »
Hi

Price for NA pump performance build is $750 + shipping


Giles

exchange rate is pretty well 1:1 now

Reply #28November 03, 2008, 10:51:52 pm

Giles@PerformanceDiesel

  • Authorized Vendor
  • Junior

  • Offline
  • **

  • 222
    • http://www.performancediesel.ca
Website Info
« Reply #28 on: November 03, 2008, 10:51:52 pm »
I keep forgetting to tell everybody about my website.


www.performancediesel.ca

Giles

Reply #29November 04, 2008, 05:56:29 am

Smokey Eddy

  • Veteran

  • Offline
  • ***

  • 3468
    • McScrubbins Body Wash
Giles' contact info
« Reply #29 on: November 04, 2008, 05:56:29 am »
Sick site Giles. Nice testimonial  :o !!!
I wish, so much, that I could submit one too but I'm too pressed for cash with school. And alas, I must wait! But one day!!! ONE DAY!!!! :twisted:  :twisted:  :twisted:  :twisted:
Ed
Blacked out mk2 AAZ Jetta RIP. You are missed.
White 1999.5 ALH Golf 2dr. Low & wide. Rammed off the road RIP.
Blue 2009 CR140 Jetta CBEA/CJAA. Malone stage 2. EGR/DPF/Exhaust-valve deletes. 2.5" open exhaust. ADP Turbo swap. 1-stage nitrous kit. THROWN ROD

 

S-PAutomotive.com