S-PAutomotive.com

Author Topic: FS 1.6TD Pump/Injectors/Lines-----SOLD  (Read 5032 times)

Reply #15February 12, 2012, 03:24:20 pm

libbydiesel

  • Global Moderator
  • Veteran

  • Offline
  • *****

  • 3416
Re: FS 1.6TD Pump/Injectors/Lines
« Reply #15 on: February 12, 2012, 03:24:20 pm »
I said that wrong.  They should have noticeable radial play but axial play (thrust) should be virtually imperceptible.  I'll edit my original post.

Reply #16February 12, 2012, 07:16:14 pm

libbydiesel

  • Global Moderator
  • Veteran

  • Offline
  • *****

  • 3416
Re: FS 1.6TD Pump/Injectors/Lines
« Reply #16 on: February 12, 2012, 07:16:14 pm »
In-out=bad.  Side to side=good. 

Reply #17February 12, 2012, 07:52:06 pm

R.O.R-2.0

  • Veteran

  • Offline
  • ***

  • 7335
  • Personal Text
    Pacific Northwest - Oregon - USA
Re: FS 1.6TD Pump/Injectors/Lines
« Reply #17 on: February 12, 2012, 07:52:06 pm »
after running my K24 today, i felt the clearances again, and the axial (thrust) clearance is tight, undetectable.. there is a TINY bit of radial clearance tho, just as should be..
92 Jetta GLI - Black, 1.6D w/ GT2056V turbo..
86 GTI - 4 Door, Med Twilight Gray, Tow Machine..
86 Audi Coupe GT - Tornado Red, All Stock.. WRECKED.
89 Toyota 4Runner - Dark Grey Metallic, LIFTED!

Turbo: exhaust gasses go into the turbocharger and spin it, witchcraft happens and you go faster.

Reply #18February 13, 2012, 10:27:25 pm

Dakotakid

  • Veteran

  • Offline
  • ***

  • 1239
Re: FS 1.6TD Pump/Injectors/Lines
« Reply #18 on: February 13, 2012, 10:27:25 pm »
One of the few times when getting the ol' "in-out" ain't a good thing............
The mask and the shot(s) are actually an IQ test. If you are wearing or circulating, you just failed the test. I can't feel sorry for you.

Reply #19February 13, 2012, 10:31:30 pm

8v-of-fury

  • Guest
Re: FS 1.6TD Pump/Injectors/Lines
« Reply #19 on: February 13, 2012, 10:31:30 pm »
After reading this I ran down to the shop to check on the k03 on my AHU. After 430,000kms there is no.. In and Out play being  pushing the shaft parallel with the ground, and just a bit of up and down play.. the fins towards the compressor housing.

Reply #20February 16, 2012, 08:50:41 pm

8v-of-fury

  • Guest
Re: FS 1.6TD Pump/Injectors/Lines
« Reply #20 on: February 16, 2012, 08:50:41 pm »
Update your original thread title, you may get more interest :).