Hi! I have a 1990 Audi 90 quattro that I am putting a 1.6TD into and am also uprating the brakes on.
I have wilwood superlite II calipers in the front and wilwood dynalite billets in the rear and will be running a dual master/bias setup. There is no power assist and I am wondering what size master cylinders to run for the front and rear.
I can use 1", 7/8", 3/4". I have to measure the piston diameters on the calipers yet, I know that is a big thing to know but I am looking for suggestions. Thanks guys.