« previous next »
Pages: [1]

Author Topic: I need connecting rod bushings AAZ  (Read 3953 times)

April 06, 2011, 01:54:41 pm

paolomarks

  • Junior
  • Offline
  • **
  • 146
I need connecting rod bushings AAZ
« on: April 06, 2011, 01:54:41 pm »
where can I get con rod bushings for my AAZ.  Are they the same as later TDI's. Thanks,  Paolo
Logged


Reply #1April 11, 2011, 01:18:03 pm

paolomarks

  • Junior
  • Offline
  • **
  • 146
Re: I need connecting rod bushings AAZ
« Reply #1 on: April 11, 2011, 01:18:03 pm »
Hi again, I still need a set of connecting rod bushings for my AAZ.  Who's got them?  I've looked lots of places without luck.  Thanks, Paolo.  I also need a crankshaft gear off of an early TDI , as I'm going to machine my AAZ's crankshaft for the stronger TDI setup. Paolo
Logged
Reply #2April 11, 2011, 01:23:31 pm

R.O.R-2.0

  • Veteran
  • Offline
  • ***
  • 7335
  • Personal Text
    Pacific Northwest - Oregon - USA
Re: I need connecting rod bushings AAZ
« Reply #2 on: April 11, 2011, 01:23:31 pm »
someone put TDI pistons on AAZ rods, and a TDI head on it and made a M-Tdi.. so i imagine the TDi pin bushings are the same dimensions..
Logged
92 Jetta GLI - Black, 1.6D w/ GT2056V turbo..
86 GTI - 4 Door, Med Twilight Gray, Tow Machine..
86 Audi Coupe GT - Tornado Red, All Stock.. WRECKED.
89 Toyota 4Runner - Dark Grey Metallic, LIFTED!

Turbo: exhaust gasses go into the turbocharger and spin it, witchcraft happens and you go faster.
Reply #3April 11, 2011, 04:41:24 pm

paolomarks

  • Junior
  • Offline
  • **
  • 146
Re: I need connecting rod bushings AAZ
« Reply #3 on: April 11, 2011, 04:41:24 pm »
I was quoted 20 bucks a piece for the bushings! said they had to order them from the factory.  Any one have a better source?  Also still need a crankshaft gear from a 96-99 TDI.  Thanks, Paolo
Logged
Pages: [1]
« previous next »
 

Fixmyvw.com