-
Dash idea
by
macka
on 19 Feb, 2011 13:59
-
So I thinking about modding my dash. I want to cut out the ashtray and cubby and plate it over. The cut however will trim a chunk so it is verticle and I intend to put a toyota cup holder in. The toyota cup holder is toyota PN 55615-16010. It looks like it is from the mid to late 80's corolla.
-
#1
by
erice1984
on 20 Jul, 2011 20:29
-
interesting... I have been wanting a cup holder in my rabbit for quite some time now. I am curious, would like to see pictures!
-
#2
by
ORCoaster
on 20 Jul, 2011 21:03
-
Cup Holders? Next you will want to route some of the hot water from the heater to make a tray hot to hold burgers and burritos.
Seriously, My cup holder is my hand. When it is empty I put the cup between the passenger seat and the e brake hump.
Pics would be good. How about some tray like thing like on an airplane?
-
#3
by
maxfax
on 20 Jul, 2011 22:44
-
Gotta have a cup holder so you don;t spill your beer while "power driving"
*Disclaimer* Driving under the influence of alcohol is not promoted by myself or this forum..
-
#4
by
the caveman
on 21 Jul, 2011 06:13
-
Take a sawzall to it and send us pictures after the carnage
-
#5
by
R.O.R-2.0
on 21 Jul, 2011 11:25
-
Gotta have a cup holder so you don;t spill your beer while "power driving"
*Disclaimer* Driving under the influence of alcohol is not promoted by myself or this forum..
what about driving under the influence of other things?!
-
#6
by
R.O.R-2.0
on 21 Jul, 2011 11:27
-
Cup Holders? Next you will want to route some of the hot water from the heater to make a tray hot to hold burgers and burritos.
Seriously, My cup holder is my hand. When it is empty I put the cup between the passenger seat and the e brake hump.
Pics would be good. How about some tray like thing like on an airplane?
im with you on this one.. if you cant hold it in hand, or between the legs, or beside the e-brake, then you dont need to hold it..
my mk2 has a beer holder on each side. just put the can/bottle between the seat and the slide handle..
-
#7
by
maxfax
on 21 Jul, 2011 13:37
-
what about driving under the influence of other things?!
Most other things typically don't require a cup holder so I didn't bother to add them..
-
#8
by
ORCoaster
on 21 Jul, 2011 19:29
-
Has anyone noticed the number of "things" we need to drive these days. Besides the cup holder/ brewskie bucket, we need a phone, a GPS, for those that smoke a pack and lighter, then add the wallet and maybe checkbook if she lets you have it.
Going to need a shopping basket up front not a cup holder.
Maybe that is why I stripped the rear seat out of the Rabbit. And most people think it's because I need to pack three tool boxes. Ha. It's for the cooler man.
-
#9
by
rabbitman
on 21 Jul, 2011 21:31
-
I set my coffee (full cup) between the ebrake and seat to run into a store and forgot, kinda makes a mess.........I did get about a half a mile before it fell though.
I too have wished for cup holders. Have you noticed that when opened, the glove box lid is a cup holder
.
-
#10
by
ORCoaster
on 21 Jul, 2011 21:47
-
Yea works great until you start moving. Then watch out.
-
#11
by
CRSMP5
on 22 Jul, 2011 07:50
-
my cup holder in the burnt toast project..
ive seen where a guy modded his bunny speaker grills and that usless area for speakers and build cup holders into them... thats a 81-84 westy dash... so maybe get a spare set of grills.. mod them.. the bottom of cup/can is held in place by the vent ducts..
-
#12
by
theman53
on 22 Jul, 2011 08:40
-
I have thought of using a hole saw and the port holes in things like speaker cabs and computer desks with a bottom put in them on my MK2 dash. Haven't done it yet though.
-
#13
by
ORCoaster
on 22 Jul, 2011 21:09
-
CRSMP5 Love the Fila holder. Can you explain the gauges? This is your recent van project. 10 gauges? Man it's not an airplane. What are you monitoring?
I have thought about finding some of those old style hang on the door type holders. Maybe some sort of glued on tab that would accept a holder on the dash. Kind of like a rear view mirror does.
-
#14
by
CRSMP5
on 22 Jul, 2011 21:21
-
gauges simple...
speedo..
oil temp
water temp
100 amp running duel batts for camping..
tach
thats on right side of speedo..
left...
volt
clock as you cannot read radio in daylight
oil pressure
fuel
egt
boost
thats 11 by the way...
so amp/clock are options..
could use a 2 way switch for oil/water temps (so could have been 1).. but all my td's have both as i wanna know which each is doing.. stil need to add in a sensor in the waterpump so can switch between head and water pump temps... yes they can vary... at least on a idi td they do under long boost loads.. just lacked the sensor to do it when i built it.. my b3 wagon has both... my old 81 caddy that had a bae turbo on it had both..
being the tdi-m i wanted to monitor my egt and boost levels
wanna have some fun.. go ask a shoe store to sell you 1 shoe...
they looked at me like a squirrl was nibbling on my foot.. but for $5 and some odd cents they sold me 1... the $10k+ leg/foot yes its a real prostetic.. just adds for WTF was they thinking aspect..