Does anyone know where to get a single gasket for the block off plate on the front of the 1.6? It comes in the 20.00 bottom end gasket set, but I can't find it by itself. It is the one that goes on the cover for the intermediate shaft. I would rather not make one.
Does anyone know where to get a single gasket for the block off plate on the front of the 1.6? It comes in the 20.00 bottom end gasket set, but I can't find it by itself. It is the one that goes on the cover for the intermediate shaft. I would rather not make one.
If I'm not mistaken a small block chevy fuel pump gasket will work.
just lay a piece of thin cardboard or gasket paper over the block off plate and tap around the edge with a hammer, voila! instant gasket..
thats how i make gaskets atleast.. i love the looks i get from people when i tell them i use a hammer to build gaskets.
Fuel pump gasket from an early gasser with a carb.. Early Dodge Omni should work for an application
Here's the Carquest P/N's (I believe they are Victor numbers as well) certainly someone can cross them..
Carquest P/N D24076 or D24097
bestpricecarparts sells em i believe as a "coolant flange gasket"
they are the same shape & size if you're talking about what i think you're talking about...