Author Topic: Looking for someone with IDI timing tools around Abbotsford, BC (Read 1838 times)

steevz · « **on:** November 14, 2011, 01:13:11 pm »

Sorry guys, didn't know what forum to post this in. I am in need of a dial indicator for loan or rent in the Abbotsford area of BC, Canada.

Thanks. If posted in wrong location, please move.

trav1856 · « **Reply #1 on:** November 15, 2011, 03:28:12 pm »

I'd lend ya mine, but I'm in Oklahoma

steevz · « **Reply #2 on:** November 16, 2011, 10:52:33 am »

lol, thank for the offer anyways.

Mark(The Miser)UK · « **Reply #3 on:** November 18, 2011, 05:37:10 am »

You could always use a 8mm x 1mm pitch bolt screw in with engine off TDC like a gauge zeroing procedure, and then unscrew 1 turn and you have your 1mm timing.

Gently advance engine until pump hits the screw.

If not at TDC then back off engine and adjust pump, and recheck

Author Topic: Looking for someone with IDI timing tools around Abbotsford, BC (Read 1838 times)

steevz

Looking for someone with IDI timing tools around Abbotsford, BC

trav1856

Re: Looking for someone with IDI timing tools around Abbotsford, BC

steevz

Re: Looking for someone with IDI timing tools around Abbotsford, BC

Mark(The Miser)UK

Re: Looking for someone with IDI timing tools around Abbotsford, BC