« previous next »
Pages: 1 [2]

Author Topic: TDI Piston  (Read 9114 times)

Reply #15November 18, 2011, 01:51:56 pm

Helliouse

  • Junior
  • Offline
  • **
  • 164
Re: TDI Piston
« Reply #15 on: November 18, 2011, 01:51:56 pm »
Resurrection...
Sorry for the no response, life snuck up on me...
Thanks for the information.

I found a photo with dimensions awhile ago for a set of custom pistons. I will have to find it and post on here.
Who will I get to make them...I was in contact with arias pistons (NANCY ROBERTS, [email protected]), but have not been able to continue with this due to, well, life.
I am hoping to pick this up soon though, I will post and update once I do. If anyone has another suggestion for a Piston maker let me know.

Steel ring grooves are a must, I am hoping to do something with the pistons that should help with strength issues and ring position.

Brad
Logged
1990 Jetta TD...Its a Project! And wait...its built in Wolfsberg! swEEt - 1.6l TD = Dead... TDI ALH in the works...
Reply #16November 18, 2011, 09:23:24 pm

410

  • Veteran
  • Offline
  • ***
  • 581
Re: TDI Piston
« Reply #16 on: November 18, 2011, 09:23:24 pm »
I have a slightly damaged piston you can have.  Just cover the shipping and it's yours.
Logged
Toyota truck 4x4 with Mtdi, M-vnt gt1749va, 11mm pump, fmic, smog .216 nozzles.  Sold!
Working on 1993 4runner mtdi, gtb1756vk, 11mm pump, smog .216 nozzles, custom 1" thick adaptor plate, pd150 intake manifold.
Pages: 1 [2]
« previous next »