« previous next »
Pages: [1]

Author Topic: 1.6TD Hydro Head for sale  (Read 3843 times)

March 15, 2010, 02:09:02 pm

subsonic

  • Veteran
  • Offline
  • ***
  • 1836
1.6TD Hydro Head for sale
« on: March 15, 2010, 02:09:02 pm »
Just dropped off a 1.6TD Hydro head at the machine shop.  Getting it hot tanked and pressure tested.  I will pick it up tomorrow.  Has the standard cracks between the valves, you can peen them if you want.  It does have some cracks in the pre-cups.  I will get some picture up tomorrow.  Will need a few new exhaust studs.  Some got munged up getting the manifold off. I have never run this head, it came off the hydro block I had rebuilt. Block has a new AAZ head on it now :).

It is what it is.  Clean and pressure tested.  Might have a light pass done on the surface to make sure it is flat.  Pictures will be up tomorrow.

$100 bucks / clams / greenbacks

Jim
Logged
2009 Jetta TDI Loyal edition, 6-spd. 16V 2.0CR


1985 VW Golf 5-spd, 4-door, 1.6NA  Bought from orig. owner in Savannah with 42,000 miles.
"Making the jump NA to TD" slow but sure.

1980 VW Rabbit LS 5-spd, 4-door 1.6NA almost 450,000miles  RIP
Reply #1March 16, 2010, 03:15:49 pm

subsonic

  • Veteran
  • Offline
  • ***
  • 1836
Re: 1.6TD Hydro Head for sale
« Reply #1 on: March 16, 2010, 03:15:49 pm »
Failed pressure test  :(.

Anyone need a parts head/ core deposit head? 
Logged
2009 Jetta TDI Loyal edition, 6-spd. 16V 2.0CR


1985 VW Golf 5-spd, 4-door, 1.6NA  Bought from orig. owner in Savannah with 42,000 miles.
"Making the jump NA to TD" slow but sure.

1980 VW Rabbit LS 5-spd, 4-door 1.6NA almost 450,000miles  RIP
Reply #2March 21, 2010, 12:25:16 am

truckinwagen

  • Veteran
  • Offline
  • ***
  • 1895
Re: 1.6TD Hydro Head for sale
« Reply #2 on: March 21, 2010, 12:25:16 am »
I am looking for a head to donate valves, lifters etc to a good head that I have with bent valves.

what do you want for it?

-Owen
Logged
83 Opel Kadett Diesel
Pages: [1]
« previous next »