« previous next »
Pages: [1]

Author Topic: fs: raceware head studs  (Read 6269 times)

September 15, 2005, 07:59:45 pm

Dr. Diesel

  • Authorized Vendor
  • Veteran
  • Offline
  • ***
  • 1341
fs: raceware head studs
« on: September 15, 2005, 07:59:45 pm »
Selling a set of raceware head studs to fit MF or AAZ engines. Less than a year old, approximately 9000km's, mostly under 10 psi boost. Upgrading to bigger studs, don't need these ones anymore.
$150 cdn /best offer.
Logged
I repair, maintain and modify VW's and BMW's.
Good work done at affordable rates. Welding and fabricating, too.
Performance Diesel Injection's Super Pump: gotta have one!
Reply #1September 16, 2005, 02:23:00 am

vwmike

  • Authorized Vendor
  • Veteran
  • Offline
  • ***
  • 1158
fs: raceware head studs
« Reply #1 on: September 16, 2005, 02:23:00 am »
hmmmm....
Logged
Reply #2September 17, 2005, 08:34:48 pm

SMOKEYDUB

  • Veteran
  • Offline
  • ***
  • 630
fs: raceware head studs
« Reply #2 on: September 17, 2005, 08:34:48 pm »
uhhh what about me! well have to talk.
Logged
12mm PUMP 'O' DEATH on a 1.6L
(courtesy of GILES)

2000 NISSAN XTERRA (5 SPD)
1990 VW JETTA 20 VALVE DRAG CAR
1984 RABBIT TD 2dr (SOLD)
1.8t AEB soon around 550 whp
Reply #3September 18, 2005, 05:01:05 am

Dr. Diesel

  • Authorized Vendor
  • Veteran
  • Offline
  • ***
  • 1341
fs: raceware head studs
« Reply #3 on: September 18, 2005, 05:01:05 am »
drop by anytime, smokey.  I think I saw you on Main St. East Friday night around 11 something.
Logged
I repair, maintain and modify VW's and BMW's.
Good work done at affordable rates. Welding and fabricating, too.
Performance Diesel Injection's Super Pump: gotta have one!
Reply #4September 19, 2005, 03:41:14 pm

Hammy

  • Junior
  • Offline
  • **
  • 169
fs: raceware head studs
« Reply #4 on: September 19, 2005, 03:41:14 pm »
Do you still have these Doc.?
Logged
Hammy (Jason)
'96 Golf, 1.8 gas
'91 Golf, 1.6 TD
'98 GMC 1500 4x4, 5.7L (doing my best to save the oil companies, 85 liters takes me 600 km)
'78 Ford 3000 3cyl, 201 diesel, with loader
Reply #5September 19, 2005, 05:50:24 pm

Dr. Diesel

  • Authorized Vendor
  • Veteran
  • Offline
  • ***
  • 1341
fs: raceware head studs
« Reply #5 on: September 19, 2005, 05:50:24 pm »
yes, still have 'em!
Logged
I repair, maintain and modify VW's and BMW's.
Good work done at affordable rates. Welding and fabricating, too.
Performance Diesel Injection's Super Pump: gotta have one!
Reply #6September 25, 2005, 08:31:52 pm

fuslit

  • Junior
  • Offline
  • **
  • 118
fs: raceware head studs
« Reply #6 on: September 25, 2005, 08:31:52 pm »
hi,
I'm in the process of rebuilding a 1.6l td motor,  will these fit the engine? (what are the lengths of them, 11mm or 12 mm?) At the moment, I'm not sure which engine blocks I have (I'll have to check) If they are MF (I'm pretty sure they are) I could do $90 us (105 cdn?) http://www.x-rates.com/calculator.html funds (sorry if thats a lowball offer...)

Also, are these the studs in this thread http://vwdiesel.net/phpBB/viewtopic.php?t=344&highlight=raceware?
Did you figure out what the torque specs on should be? Do you have instructions for re-install used head studs, Would they include the nuts for them as well.

sorry for the questions... I'll be asking more as this will be my first rebuild... and I'm just getting new parts together.

Thanks in advance

-Todd
Logged
'81 rabbit 4dr 1.6TD [project]
'98 jetta tdi [daily]
Reply #7September 28, 2005, 12:56:01 am

Dr. Diesel

  • Authorized Vendor
  • Veteran
  • Offline
  • ***
  • 1341
fs: raceware head studs
« Reply #7 on: September 28, 2005, 12:56:01 am »
Hi,
they will fit MF and AAZ engines. The overtorqued studs have been doing time satisfactorily in a n/a diesel golf with no signs of leakage. The studs for sale were the replacements for those studs. Off the top of my head, the torque specs are 20, 40 and 50 ft. lbs, using conventional 20W50 engine oil.
That price is a little low.
Logged
I repair, maintain and modify VW's and BMW's.
Good work done at affordable rates. Welding and fabricating, too.
Performance Diesel Injection's Super Pump: gotta have one!
Reply #8October 05, 2005, 08:53:24 am

DVST8R

  • Veteran
  • Offline
  • ***
  • 535
fs: raceware head studs
« Reply #8 on: October 05, 2005, 08:53:24 am »
You have a PM.
Logged
The Brett of the board...



The Dark Side of Beauty.[/i]
Reply #9October 06, 2005, 10:26:51 pm

Dr. Diesel

  • Authorized Vendor
  • Veteran
  • Offline
  • ***
  • 1341
fs: raceware head studs
« Reply #9 on: October 06, 2005, 10:26:51 pm »
sold
Logged
I repair, maintain and modify VW's and BMW's.
Good work done at affordable rates. Welding and fabricating, too.
Performance Diesel Injection's Super Pump: gotta have one!
Reply #10November 03, 2005, 05:28:39 pm

bildon

  • Newbie
  • Offline
  • *
  • 1
    • http://www.bildon.com
Raceware Studs
« Reply #10 on: November 03, 2005, 05:28:39 pm »
I have RW diesel studs available if anyone still needs them.  Best prices too. Reply here, IM me here or send an email to bill at bildon.com

Thanks,
Bill
Logged
Bill Sulouff - Bildon Motorsport
Volkswagen Racing Equipment
newbielink:http://www.Bildon.com [nonactive]
Pages: [1]
« previous next »