« previous next »
Pages: [1]

Author Topic: Injector pump shaft Bolt  (Read 2103 times)

August 04, 2009, 09:20:20 am

kane66

  • Junior
  • Offline
  • **
  • 131
Injector pump shaft Bolt
« on: August 04, 2009, 09:20:20 am »
I accidentally cross threaded the nut that holds the sprocket on the injector pump :'( and I'm going to get another today. Does anyone know the size of the shaft and the pitch of the threads so I can just go in and ask for the specific nut.
Logged
1985 Jetta WBE
Reply #1August 04, 2009, 09:29:55 am

kane66

  • Junior
  • Offline
  • **
  • 131
Re: Injector pump shaft Bolt
« Reply #1 on: August 04, 2009, 09:29:55 am »
looks like its a 12mm but what is the pitch
Logged
1985 Jetta WBE
Reply #2August 04, 2009, 01:50:03 pm

theman53

  • Global Moderator
  • Veteran
  • Offline
  • ***
  • 7835
  • Personal Text
    Holmes County Ohio - North Central Ohio
Re: Injector pump shaft Bolt
« Reply #2 on: August 04, 2009, 01:50:03 pm »
I did something similar and had to buy more. If I remember right it is 12mm with a 1.75 thread. I am 99% sure becuase my tap set had the correct thread and I don't have any special metric fine thread stuff in my tap and die set.
Logged
Reply #3August 04, 2009, 09:04:23 pm

captainpartytime

  • User+
  • Offline
  • *
  • 39
Re: Injector pump shaft Bolt
« Reply #3 on: August 04, 2009, 09:04:23 pm »
I just chased my threads, with my tap and die, to clean them out and yes, it was 12mmx1.75
Logged
-Kerry

1982 Diesel Westfalia Vanagon
1989 Wolfsburg 7-Passenger Vanagon
Reply #4August 05, 2009, 10:26:39 pm

kane66

  • Junior
  • Offline
  • **
  • 131
Re: Injector pump shaft Bolt
« Reply #4 on: August 05, 2009, 10:26:39 pm »
thanks a lot worked like a charm  ;D....
Logged
1985 Jetta WBE
Pages: [1]
« previous next »