Author Topic: AAZ 1.9TD Rover pin part number (Read 7797 times)

bert · « **Reply #15 on:** May 07, 2008, 01:06:36 pm »

.................aparently,,,,,,,,,,,,,,,,the .......pin ..is coming tomorrow?

??
will let you know.......
Bert :wink:

bert · « **Reply #16 on:** May 08, 2008, 11:17:12 am »

Ok lads,the pin is here

part number is wait for it :wink:
1 463 123 531
Bert

numbnuts · « **Reply #17 on:** May 08, 2008, 01:33:06 pm »

sshweeett :wink:

stunofish · « **Reply #18 on:** May 09, 2008, 06:16:06 am »

Thanks for all the work guys. Now to find a dealer who will sell me one.

Stu

bert · « **Reply #19 on:** May 09, 2008, 10:39:54 am »

dongti's pin come from carwoods diesel center in the midlands, phone number is 0121 552 9524 ask for ken say lee told you to ring :lol: ive told him there might be more required :wink: also the other branch is in coventry,phone number is 02476 449533
Bert

stunofish · « **Reply #20 on:** May 14, 2008, 12:43:01 am »

Thanks Bert, I have ordered the pin. Do I need a new spring or can I use the old one. Ken said that for that pin there are 4 springs to choose from, any ideas ?

Thanks
Stu

Baxter · « **Reply #21 on:** May 14, 2008, 06:47:06 am »

I got 2 today, whacked one in the AAZ thats slowly going together for my Atlantic.
I can get these reasonably quickly, but being in the trade I was surprised to see how little discount there was on them, anyway, I'm going to stick a few items for sale up on my Brickwerks website, as I have found a supply for Nozzles and I'm just getting set up with Kolbenshmidt, Elring, and a few other peoples.
I just do T3 and T4 parts, but as I am dealing with these companies anyway and I see that some people struggle to get hold of certain parts I may as well stock a few, or at least offer to buy stuff in for people.

The taper is quite severe isn't it! I was surprised to see that the cone is central, and theres no adjustment on it.

I've brought them both home anyway, so I can take a few pictures.

bert · « **Reply #22 on:** May 14, 2008, 09:59:03 am »

I just used the existing aaz spring,and yes the cone is servere enough :twisted: :wink:
Bert

jimfoo · « **Reply #23 on:** May 14, 2008, 10:32:04 am »

If you use the AAZ spring, you will not be taking advantage of the pin. It goes to full fuel with only 4 psi, so if you adjust fueling for no smoke with regular driving, the pin won't be able to add any more. If you have it adjusted for full throttle, I would imagine you will have smoke at lesser throttle settings and your mileage will suffer.

bert · « **Reply #24 on:** May 14, 2008, 01:20:08 pm »

to be honest i have no smoke and absolutley loads of power,i have not touched the fuel screw,nor any other pump alteration just put the pin in and drive,i boost at 11 psi flat out with a T3 and its a great fun car to drive,the acceleration is amazing

Bert

Baxter · « **Reply #25 on:** May 14, 2008, 02:48:44 pm »

I've stuck a spare on my shop.
Yes, I know about the price...

stunofish · « **Reply #26 on:** May 16, 2008, 12:22:51 am »

Thanks to everyone and a great thanks to Bert.

Fitted and you can feel it. Feels like there is something under your foot now.

Thanks for all your time.

Stu

numbnuts · « **Reply #27 on:** May 16, 2008, 04:55:35 am »

definately gonna get 1 of these when the golf passes the mot :lol:

Sc0rian · « **Reply #28 on:** May 22, 2008, 12:53:31 pm »

-delete----

Powered by Spearco · « **Reply #29 on:** June 06, 2008, 02:12:55 pm »

I just got my Rover boost pin in today and will be installing it as well. $47.99 is not that bad. Thanks for the info and I'll let ya know how it feels, maybe even a dyno sheet to show improvments.
Thanks, Josh

Author Topic: AAZ 1.9TD Rover pin part number (Read 7797 times)

Baxter

Baxter