-
#30
by
jettabrendan
on 29 Mar, 2009 21:43
-
nope 2 is thinner, 1 being thinnest 3 thickest.
-
#31
by
8v-of-fury
on 29 Mar, 2009 21:50
-
for some asinine reason i thought 1 was thickest
Ok so you've boosted compression a bit.. aw hell i dunno.
it has to be timing! thats all thats left
-
#32
by
jettabrendan
on 29 Mar, 2009 23:58
-
i did everything except check piston prutrusion. seeing as people tell me that 95% come with 2 notchers i thought i had a pretty good chance that it was the right one. The head and gasket were replaced before and they might have just put in a 3 notch just in case. Would bad injectors cause it to do what its doing? not even a small hiccup?
-
#33
by
jettabrendan
on 30 Mar, 2009 00:33
-
yup, i lined everything up before i took it apart so it was all good when i put it back. I did push the advance handle in too, but what happens if it is left out?
-
#34
by
jettabrendan
on 30 Mar, 2009 00:41
-
ohh okay, so im still very stumped as to what the no start problem is. Say the pump was moved when i had the head off, i did remove the bolts that hold on the pump for some reason... I could have moved it and not even realized, then bolted her back together with the pump way off?
-
#35
by
jettabrendan
on 30 Mar, 2009 00:54
-
i had to make my own with a 303 british casing wrapped in elec tape. it worked but prob not good enough. i seen pics of the tool and they look different as to what fits in my engine. i had to squish the end of the casing for it to fit in, its a flat slot. the tools i see were just pins.
-
#36
by
jettabrendan
on 30 Mar, 2009 22:51
-
what size socket do i need to take out the injectors?
-
#37
by
subsonic
on 30 Mar, 2009 23:04
-
Did you use the iming pin in the pump sprocket when installing the timing belt?
i had to make my own with a 303 british casing wrapped in elec tape. it worked but prob not good enough. i seen pics of the tool and they look different as to what fits in my engine. i had to squish the end of the casing for it to fit in, its a flat slot. the tools i see were just pins.
Have you ever lived in North or NW Maine Brendan? The .303 case wrapped in electric tape is just beautiful man. Classic. :lol: :lol: :lol:
-
#38
by
jettabrendan
on 30 Mar, 2009 23:22
-
no but i am from Cape Breton, close enough
i figured it would be easy to fashion up a tool and it was the first thing i loked at haha
-
#39
by
jettabrendan
on 31 Mar, 2009 11:53
-
Anyone know the size of the socket to take out the injectors? I'm in the store right now.
-
#40
by
jettabrendan
on 01 Apr, 2009 11:40
-
okay i got the injectors out, 2 of them had DRY pre chambers.. the nozzles were dirty, i took them apart cleaned the hell outta them. While i had them out i also checked to see if the glow plugs were working and they werent. This would probbly slve my no start problem.. BUT my other jetta starts without glow plugs, just real rough. So its probably also my timing thats out to lunch.