FS: 1Z Pistons and Rods - Parts for Sale/Wanted - VWDiesel.net The IDI, TDI, and mTDI source.

• FS: 1Z Pistons and Rods by Spulen81 on 07 Sep, 2008 06:49
• These came from a 1Z I tore down and rebuilt.  I used some ALH pistons I had instead.  There is nothing wrong with these.  The parts were just wiped off and have not been really cleaned yet.
  
  
  Pistons: $150 shipped
  
  Will trade for a good TDI 02A or O2J starter.
  
  
  
  
• #1 by Spulen81 on 28 Jan, 2009 06:11
• Still have these, price dropped.
• #2 by fatmobile on 31 Jan, 2009 02:39
• I broke an oil ring on one of the 1.7 pistons I got.
  http://www.vwdiesel.net/phpBB/viewtopic.php?t=18115
   Hard enough finding pistons for a 1.7TD, not sure where to even look for rings.
   
   I'm wondering if the TDI/AZZ oil rings will fit, first oversize is the same diameter.
   What would it take for you to break a piece of oil ring off and send it in an envelope?
• #3 by Spulen81 on 01 Feb, 2009 13:29
• I can do that.  I assume anybody that would buy my pistons would be re placing the rings anyways.  Shoot me a PM with your address and I'll mail you one at no charge.  
• #4 by fatmobile on 02 Feb, 2009 02:08
• Yeah, I didn't figure they would be used again,..
   for anything but scrap.
  
   What year did the 1Z come out of?
  
  Thanks, I hope the cross section matches.
   What diameter are the pistons?
• #5 by Spulen81 on 02 Feb, 2009 05:23
• Its a later 1Z, it had 7mm valve stems.  I don't know the year specifically. The pistons are 79.5mm.
• #6 by Spulen81 on 01 Apr, 2009 06:34
• These are up on ebay now.  No reserve.