« previous next »
Pages: [1]

Author Topic: FS: 1Z Pistons and Rods  (Read 4388 times)

September 07, 2008, 06:49:13 am

Spulen81

  • Junior
  • Offline
  • **
  • 103
FS: 1Z Pistons and Rods
« on: September 07, 2008, 06:49:13 am »
These came from a 1Z I tore down and rebuilt.  I used some ALH pistons I had instead.  There is nothing wrong with these.  The parts were just wiped off and have not been really cleaned yet.


Pistons: $150 shipped

Will trade for a good TDI 02A or O2J starter.



Logged
'86 4Runner TDI SOLD
'91 GTI - TDI converted
Reply #1January 28, 2009, 06:11:44 am

Spulen81

  • Junior
  • Offline
  • **
  • 103
FS: 1Z Pistons and Rods
« Reply #1 on: January 28, 2009, 06:11:44 am »
Still have these, price dropped.
Logged
'86 4Runner TDI SOLD
'91 GTI - TDI converted
Reply #2January 31, 2009, 02:39:07 am

fatmobile

  • Veteran
  • Offline
  • ***
  • 2922
    • http://www.geocities.com/vwfatmobile/
FS: 1Z Pistons and Rods
« Reply #2 on: January 31, 2009, 02:39:07 am »
I broke an oil ring on one of the 1.7 pistons I got.
http://www.vwdiesel.net/phpBB/viewtopic.php?t=18115
 Hard enough finding pistons for a 1.7TD, not sure where to even look for rings.
 
 I'm wondering if the TDI/AZZ oil rings will fit, first oversize is the same diameter.
 What would it take for you to break a piece of oil ring off and send it in an envelope?
Logged
Tornado red, '91 Golf 4 door, with M-TDI 12mm pump, south bend clutch, VNT-15 turbo, 02A trany
MK4s: 2000 TDI jetta, 2003 TDI wagon, 2000 golf 2.0 gasser.
'84 Rabbit with 1.7TD KY block pistons bored to 80mm, VNT-15
'84 GTI with stock 1.6TD starion intercooler.
Reply #3February 01, 2009, 01:29:27 pm

Spulen81

  • Junior
  • Offline
  • **
  • 103
FS: 1Z Pistons and Rods
« Reply #3 on: February 01, 2009, 01:29:27 pm »
I can do that.  I assume anybody that would buy my pistons would be re placing the rings anyways.  Shoot me a PM with your address and I'll mail you one at no charge.   :D
Logged
'86 4Runner TDI SOLD
'91 GTI - TDI converted
Reply #4February 02, 2009, 02:08:45 am

fatmobile

  • Veteran
  • Offline
  • ***
  • 2922
    • http://www.geocities.com/vwfatmobile/
FS: 1Z Pistons and Rods
« Reply #4 on: February 02, 2009, 02:08:45 am »
Yeah, I didn't figure they would be used again,..
 for anything but scrap.

 What year did the 1Z come out of?

Thanks, I hope the cross section matches.
 What diameter are the pistons?
Logged
Tornado red, '91 Golf 4 door, with M-TDI 12mm pump, south bend clutch, VNT-15 turbo, 02A trany
MK4s: 2000 TDI jetta, 2003 TDI wagon, 2000 golf 2.0 gasser.
'84 Rabbit with 1.7TD KY block pistons bored to 80mm, VNT-15
'84 GTI with stock 1.6TD starion intercooler.
Reply #5February 02, 2009, 05:23:16 am

Spulen81

  • Junior
  • Offline
  • **
  • 103
FS: 1Z Pistons and Rods
« Reply #5 on: February 02, 2009, 05:23:16 am »
Its a later 1Z, it had 7mm valve stems.  I don't know the year specifically. The pistons are 79.5mm.
Logged
'86 4Runner TDI SOLD
'91 GTI - TDI converted
Reply #6April 01, 2009, 06:34:18 am

Spulen81

  • Junior
  • Offline
  • **
  • 103
FS: 1Z Pistons and Rods
« Reply #6 on: April 01, 2009, 06:34:18 am »
These are up on ebay now.  No reserve.
Logged
'86 4Runner TDI SOLD
'91 GTI - TDI converted
Pages: [1]
« previous next »