Author Topic: WTB: giles IP for 1.6 NA  (Read 3839 times)

March 15, 2009, 11:55:45 pm

zyewdall

  • Veteran

  • Offline
  • ***

  • 393
WTB: giles IP for 1.6 NA
« on: March 15, 2009, 11:55:45 pm »
Anyone have one they want to unload?   If not, I'll get a new one, but I thought I'd check first.

The GTI is getting a little reworking (new injectors, new pump -- engine only has 15k on a rebuild, but the IP and injectors were not replaced when the rest of it was rebuilt).

PM me if you've got one.

Thanks

Z


'84 Mitsubishi 4x4 2.3L turbo biodiesel pickup
'91 VW Rabbit GTI with 1.6 biodiesel transplant
'81 Toyota longbed 2wd 2.2NA biodiesel pickup (for sale)
'89 Subaru 4x4 touring wagon
 '82 subaru 4x4 TDI wagon -- project on hold
1976 Ford Sasquatch pickup

Reply #1March 16, 2009, 10:44:12 am

zozep

  • Junior

  • Offline
  • **

  • 176
WTB: giles IP for 1.6 NA
« Reply #1 on: March 16, 2009, 10:44:12 am »
I have one that has been off the car for 9 months and was rebuilt 4-5 months before that....maybe has 15k on a fresh rebuild from a reputable diesel injection shop... payed 900 for the rebuild...
Its yours for 300
SOLD: 92 Jetta TD, Giles Pump set to 30 psi, MLS Head Gasket, ARP head studs, Huge eBay intercooler, blocked WG, FK suspension, 1.9L AAZ downpipe to 2.5 inch straight back.

Current: 2000 TDi, 01M :(  DG Full skid plate, Cat 2 micron Fuel Filter, Scanguage II, 4700kHIDs, DG RacePipe

Reply #2March 16, 2009, 12:40:22 pm

zozep

  • Junior

  • Offline
  • **

  • 176
WTB: giles IP for 1.6 NA
« Reply #2 on: March 16, 2009, 12:40:22 pm »
Sorry, appears my post has caused some confusion, it is NOT a Giles pump, the only giles pump i have is currently being used on my 1.6TD, this is a rebuilt pump from a 1.6NA
SOLD: 92 Jetta TD, Giles Pump set to 30 psi, MLS Head Gasket, ARP head studs, Huge eBay intercooler, blocked WG, FK suspension, 1.9L AAZ downpipe to 2.5 inch straight back.

Current: 2000 TDi, 01M :(  DG Full skid plate, Cat 2 micron Fuel Filter, Scanguage II, 4700kHIDs, DG RacePipe

Reply #3March 16, 2009, 12:44:40 pm

zozep

  • Junior

  • Offline
  • **

  • 176
WTB: giles IP for 1.6 NA
« Reply #3 on: March 16, 2009, 12:44:40 pm »
Sorry for hijacking here... lets look at it as a bump :)

If enough interest is shown for the na pump, i'll post up some pictures...
SOLD: 92 Jetta TD, Giles Pump set to 30 psi, MLS Head Gasket, ARP head studs, Huge eBay intercooler, blocked WG, FK suspension, 1.9L AAZ downpipe to 2.5 inch straight back.

Current: 2000 TDi, 01M :(  DG Full skid plate, Cat 2 micron Fuel Filter, Scanguage II, 4700kHIDs, DG RacePipe

Reply #4March 18, 2009, 12:28:31 pm

ashleyroe

  • Guest
WTB: giles IP for 1.6 NA
« Reply #4 on: March 18, 2009, 12:28:31 pm »
Quote from: "zozep"
Sorry, appears my post has caused some confusion, it is NOT a Giles pump, the only giles pump i have is currently being used on my 1.6TD, this is a rebuilt pump from a 1.6NA


i am interested in it!

Reply #5March 18, 2009, 03:11:33 pm

zozep

  • Junior

  • Offline
  • **

  • 176
WTB: giles IP for 1.6 NA
« Reply #5 on: March 18, 2009, 03:11:33 pm »
pm sent, any further interest should be PMed to me directly...

Good luck on finding that pump zyewdall.
SOLD: 92 Jetta TD, Giles Pump set to 30 psi, MLS Head Gasket, ARP head studs, Huge eBay intercooler, blocked WG, FK suspension, 1.9L AAZ downpipe to 2.5 inch straight back.

Current: 2000 TDi, 01M :(  DG Full skid plate, Cat 2 micron Fuel Filter, Scanguage II, 4700kHIDs, DG RacePipe

Reply #6March 18, 2009, 05:38:45 pm

spencebm

  • Veteran

  • Offline
  • ***

  • 686
WTB: giles IP for 1.6 NA
« Reply #6 on: March 18, 2009, 05:38:45 pm »
holy hijack, you should be ashamed zozep
Ben Spencer

 

S-PAutomotive.com