« previous next »
Pages: [1] 2 3

Author Topic: Parts place head?  (Read 9914 times)

February 25, 2009, 06:09:02 pm

somepunk22

  • Junior
  • Offline
  • **
  • 79
Parts place head?
« on: February 25, 2009, 06:09:02 pm »
Anyone purchase a remanufactured head from here? I've been searching for a straight 1.6 mech head for a little while with no luck. Any reviews? Thanks.
Logged
Reply #1February 25, 2009, 06:43:19 pm

dillenger1

  • Veteran
  • Offline
  • ***
  • 777
Parts place head?
« Reply #1 on: February 25, 2009, 06:43:19 pm »
they are a good company.
Logged
Cummins 4bta- 85 dodge prospector short bed
28 mpg!!and i can pull down a house!
1.6td in toyota pickup
10mm head ,t3 intercooled.
Reply #2February 25, 2009, 06:44:35 pm

Luckypabst

  • Veteran
  • Offline
  • ***
  • 502
Parts place head?
« Reply #2 on: February 25, 2009, 06:44:35 pm »
I'll say that their customer service is absolutely lousy. I had cash in hand to buy a head and could never get a straight answer about what they had and what they sold, between 4 phone calls. That was the last straw for me and I'll never buy anything from them again.

It was nice when I got to tell the head dude that they lost a $750 sale, and why they lost it. The $150 core charge for a new head really rubbed me the wrong way too...

Rimco did wonders on my head, surfacing it for $55 (assuming the rest of the head is still serviceable).

Chris
Logged
'82 TD Westy
'81 NA Caddy
Reply #3February 25, 2009, 06:48:21 pm

Rabbit TD

  • Veteran
  • Offline
  • ***
  • 840
Parts place head?
« Reply #3 on: February 25, 2009, 06:48:21 pm »
Yes I just bought one for my 1.6 T/D I built for my 81 Rabbit.  I bought the complete Master rebuild kit, pistons, head, the whole works.  I've bought things from them for about 4 years now and I am very happy with everything I've ever got from them and they are very helpful people. This is my second Master kit from them actually.  The name of the company that made this head is one called Top-Line and I've read that others have used them with no problems.  Just don't get the hydraulic lifter version, too many problems. This is a 12 m/m head also.  Get yourself some ARP headstuds when you put it together and save yourself a lot of problems down the road.  They screw in the block a lot deeper which is a problem on the 11 m/m non-stretch headbolts and the 12 m/m factory bolts are the stretch type and a total pain in the ass.  The ARP's work like a charm and the torquing procedure is real smooth with them, no creaking and jerking making you wonder if you cracked something or pulled a thread and most of all keep the head sealed longer.
Logged
Reply #4February 25, 2009, 07:28:35 pm

foxracer1

  • Authorized Vendor
  • Veteran
  • Offline
  • ***
  • 991
Parts place head?
« Reply #4 on: February 25, 2009, 07:28:35 pm »
I know someone directly that worked there. In the past year they have changed ownership. (Jack sold the business to his daughter) And during all the changes they have been buying cheap chinese parts yet still selling them for the same price.

I have had nothing but bad luck with them. I ordered cv boot kits and it took forever to get them.

The rebuilt pumps just consisted of checking for leaks and cleaning them up a little.

I would beware of them. They are ok for some things like parking brake cables and such but leave it at that.
Logged
84 4dr Rabbit 1.6 N/A sold to friend
86 Jetta TD getting raced out AHU 02A
98 Jetta TDI Malone tune stg 3
91 S10 305 TPI T56
86 S10 2WD Prerunner project.


Now offering turbo rebuilds. HP or stock. Any turbo you have i can rebuild it for ya.
Reseal injection pumps PM for det
Reply #5February 25, 2009, 09:19:31 pm

fatmobile

  • Veteran
  • Offline
  • ***
  • 2922
    • http://www.geocities.com/vwfatmobile/
Parts place head?
« Reply #5 on: February 25, 2009, 09:19:31 pm »
Topline is a good head,..
 if that's what they are still selling.
Logged
Tornado red, '91 Golf 4 door, with M-TDI 12mm pump, south bend clutch, VNT-15 turbo, 02A trany
MK4s: 2000 TDI jetta, 2003 TDI wagon, 2000 golf 2.0 gasser.
'84 Rabbit with 1.7TD KY block pistons bored to 80mm, VNT-15
'84 GTI with stock 1.6TD starion intercooler.
Reply #6February 26, 2009, 05:28:53 am

somepunk22

  • Junior
  • Offline
  • **
  • 79
Parts place head?
« Reply #6 on: February 26, 2009, 05:28:53 am »
So if not parts place, then where? Thanks.
Logged
Reply #7February 26, 2009, 05:59:47 am

myke_w

  • Veteran
  • Offline
  • ***
  • 1099
Parts place head?
« Reply #7 on: February 26, 2009, 05:59:47 am »
I could hook you up with a solid rebuild, pm me.

Parts Place in my opinion has always been way overpriced and very rude.

I didn't realize they are now selling Chinese junk too, sad...
Logged
Contact me for hard to find for idi and tdi parts

Reply #8February 26, 2009, 06:46:46 am

Luckypabst

  • Veteran
  • Offline
  • ***
  • 502
Parts place head?
« Reply #8 on: February 26, 2009, 06:46:46 am »
Their "all-encompassing" brake kits are all Chinese. It'd be nice if they'd put in the catalog the same note that's included in the kit, stating something to the effect of "What's this?! Chinese brake parts? Don't worry, Jack uses these on his kids cars and they're great, pay no mind to the ever increasing wheel bearing clearance and the brake shoes that require custom bending to fit..."  Or something like that. I would have liked to know this before laying out $50 to ship rubbish.

Their parking brake cable for the Caddy was longer than the one that hadn't broke yet, that was nearly 30 years old and stretched.

Their rebuilt injector pumps are very nice in my opinion but that was 2+ years ago and just bumped to a rebuilder, not done in-house. It would have been nice of them though to give a courtesy call when the part number didn't match the application...

I just went through a big mess to find a new (Topline) head. Parts Place seems to be the only place that has one and Topline themselves claim no availability until April.

I recommend you ship your head to Rimco if it's not FUBAR.

Chris
Logged
'82 TD Westy
'81 NA Caddy
Reply #9February 26, 2009, 07:17:35 am

BioDieselVW

  • Junior
  • Offline
  • **
  • 93
.
« Reply #9 on: February 26, 2009, 07:17:35 am »
I have a topline head. Its been good so far no problems and I havent melted it yet :D
Logged
81 Caddy 1.6 TD
Callaway Intercooler
4in Exhaust Stack
Super Pump !
Reply #10February 26, 2009, 08:28:54 am

arb

  • Guest
Parts place head?
« Reply #10 on: February 26, 2009, 08:28:54 am »
Yes, they have gone way down hill of late. 16 years ago, they had real diesel gugu's working and enjoying their time there.. Today, down load their latest "catalog" from their web site. Then call them for a wide variety of parts... you'll get rude or clueless guys on the line who after you get them to the right page of their catalog, will say, "Oh that, we don't carry THAT." to which you ask, when was the last time you carried it... your answer - YEARS ago. I could not get a single part from them this past 6 months for my project - including something as basic as a 2 notch HG and head bolts / studs... the conversation about studs was equally amusing.

So, the followup question - I got what I needed from S & G. They have been around a long time. I don't know if they do mail-order, but here's their site.
http://www.sgparts.com/
Logged
Reply #11February 26, 2009, 10:33:07 am

somepunk22

  • Junior
  • Offline
  • **
  • 79
Parts place head?
« Reply #11 on: February 26, 2009, 10:33:07 am »
The head I have now is a stage 3 head I purchased from Dave at passenger. Never fit from the start since it was a 11mm stud head and I have 12mm. I drilled it out and installed with arp studs 2 times. Always leaked coolant out the back, and trashed the cam. I've purchased a couple other used heads, but I haven't found one close to the flatness spec yet. Dave said I can send the $1k head back to him to inspect it, but it took many many months to get in the first place and I don't want to deal with him anymore. I don't think I want to bother rebuilding it. Well... we will see once I pull it off again and have it checked out. So now I'm tired of head problems, and just want new or proven flat head so I can drive my diesel!

Mike, do you have heads you can rebuild in stock? PM me if you have any ideas. Thanks.
Logged
Reply #12February 26, 2009, 10:54:16 am

myke_w

  • Veteran
  • Offline
  • ***
  • 1099
Parts place head?
« Reply #12 on: February 26, 2009, 10:54:16 am »
yes I think I do have a nice one back there I could rebuild. I generally like to get a usable core back so I can offer the next guy the same service but I might be able to part with one outright.

I find it strange that the last 2 times you've had a head on it, it leaked out the back.

Have you had the block checked / magnafluxed ? Perhaps the deck is warped or the block cracked? Was this ever overheated?
Logged
Contact me for hard to find for idi and tdi parts

Reply #13February 26, 2009, 11:21:16 am

arb

  • Guest
Parts place head?
« Reply #13 on: February 26, 2009, 11:21:16 am »
Quote from: "myke_w"

I find it strange that the last 2 times you've had a head on it, it leaked out the back.

Have you had the block checked / magnafluxed ? Perhaps the deck is warped or the block cracked? Was this ever overheated?


This also got my attention. Maybe you had several things going on. Who ever magnaflux's it for you should also have a "machined" flat edge. I perfer ground flat edges...

Also, do you have a photo of your block deck just before you bolted one of the heads on ?
Logged
Reply #14February 26, 2009, 04:46:16 pm

somepunk22

  • Junior
  • Offline
  • **
  • 79
Parts place head?
« Reply #14 on: February 26, 2009, 04:46:16 pm »
I have never driven the car except a few test runs. Lower end has be rebuilt. This is the only pic I have. This was from awhile ago, and is a bit messy.



I'll straight edge the head after I take it off. I'll also check the block. I was hoping to have a head to put on when I remove the current head.
Logged
Pages: [1] 2 3
« previous next »