Author Topic: IP lift pump not working  (Read 4315 times)

September 07, 2009, 09:33:28 am

dieselherb1

  • Veteran

  • Offline
  • ***

  • 354
IP lift pump not working
« on: September 07, 2009, 09:33:28 am »
I have a Quantum TD engine installed into a 81 Caddy. Got it running but only by bottle feeding fuel. How can I check the vacumm at the pump? And how much is needed? Thanks

Reply #1September 07, 2009, 09:40:42 pm

fatmobile

  • Veteran

  • Offline
  • ***

  • 2922
    • http://www.geocities.com/vwfatmobile/
Re: IP lift pump not working
« Reply #1 on: September 07, 2009, 09:40:42 pm »
A vacuum gauge attached to the fuel line will tell you how hard the pump is pulling.
 NO vacuum is needed or desired.
Tornado red, '91 Golf 4 door, with M-TDI 12mm pump, south bend clutch, VNT-15 turbo, 02A trany
MK4s: 2000 TDI jetta, 2003 TDI wagon, 2000 golf 2.0 gasser.
'84 Rabbit with 1.7TD KY block pistons bored to 80mm, VNT-15
'84 GTI with stock 1.6TD starion intercooler.

Reply #2September 08, 2009, 12:19:51 pm

rallydiesel

  • Veteran

  • Offline
  • ***

  • 1880
Re: IP lift pump not working
« Reply #2 on: September 08, 2009, 12:19:51 pm »
Try running straight ATF for a bit and rev the snotters out of it. Hopefully the rotor vanes will free themselves.
2006 Jetta TDI - gtb1749v, Malone 2, Frank's Titan 2 cam, VR6 clutch....
1991 Jetta TD - sold :(
2001 Golf TDI - Son's
1981 Rabbit - BEW tdi swap project

"ONCE YOU GO CLACK, YOU NEVER GO BACK"