Author Topic: 1.9TD part for sale (Read 4210 times)

lavabo · « **on:** January 17, 2009, 08:29:30 am »

My 1.9TD (1997 jetta) blow a piston so im parting it out.

Im shipping worldwide, i can accept paypal
----------------------------------------------------------------------

Injection pumps : 400 $ (rebuilt about 9000 km on it, cost 695 $ to rebuild) with sprocket with AC

AC compressor: make an offer, heavy

1.9TD head, may need some attention: 100$ heavy

i guess i can part the engine for 3 good usable piston and a crankshaft
timing belt and pully machined about 10 000km before it blows. Available timing belt, pulley

-------------------------------------
other part from my old 1.6td

Rebuilt Injectors for 1.6TD:100$
bought it for my old 1.6td but switched to 1.9td before i use them.
1.6td oil pan with oil return line: 60$
Turbo KKK : 150$
Turbo T3 Garrett: 150$

----------------------------------------
picture available on request
Shipping from Canada(zip G0X 2L0)

Pump:

Kudagra · « **Reply #1 on:** January 17, 2009, 06:35:19 pm »

PM sent

Vincent Waldon · « **Reply #2 on:** January 17, 2009, 07:46:15 pm »

PM'd you about the head.

Kudagra · « **Reply #3 on:** January 18, 2009, 01:27:02 am »

Quote from: "Vincent Waldon"

PM'd you about the head.

as did I.

lavabo · « **Reply #4 on:** February 16, 2009, 09:39:39 am »

sorrry i was very busy last month

here are picture of the head:

zukgod1 · « **Reply #5 on:** February 16, 2009, 11:30:29 am »

Do I see cracks from the Prechambers to the valves or is that just oil?

Not bashing on ya just curious is all.

Kudagra · « **Reply #6 on:** February 16, 2009, 04:39:37 pm »

Quote from: "zukgod1"

Do I see cracks from the Prechambers to the valves or is that just oil?

Not bashing on ya just curious is all.

Yea can I get a clean picture of those areas?

I mean for $100 I wont be that picky but if they are bad then I have a $100+ shipping paper weight.

lavabo · « **Reply #7 on:** February 17, 2009, 10:16:31 am »

not a bashing, a good concern i dont want to ship a paperweight

ill take closer picture... tell me if its good ... otherwise ill send it to scrap .. but it was working good in my car until a piston melted!!

ill bring it to my close neighboor vw diesel affocionados hell tell me about... ill get back to you on this

Kudagra · « **Reply #8 on:** February 17, 2009, 01:35:53 pm »

Quote from: "lavabo"

not a bashing, a good concern i dont want to ship a paperweight

ill take closer picture... tell me if its good ... otherwise ill send it to scrap .. but it was working good in my car until a piston melted!!

ill bring it to my close neighboor vw diesel affocionados hell tell me about... ill get back to you on this

Much-o Grassy Ass.