« previous next »
Pages: [1]

Author Topic: AEM "dry"intake filter  (Read 1889 times)

January 26, 2009, 03:16:22 pm

dillenger1

  • Veteran
  • Offline
  • ***
  • 777
AEM "dry"intake filter
« on: January 26, 2009, 03:16:22 pm »
Does anyone know if its ok to wash a "dry' filter out with water?This one does have a kit to clean it,but it doesnt get oiled.It appears to be a paper fiber filter.
Logged
Cummins 4bta- 85 dodge prospector short bed
28 mpg!!and i can pull down a house!
1.6td in toyota pickup
10mm head ,t3 intercooled.
Reply #1January 26, 2009, 03:51:43 pm

Dirtrag2

  • Veteran
  • Offline
  • ***
  • 298
AEM "dry"intake filter
« Reply #1 on: January 26, 2009, 03:51:43 pm »
if it's paper the best you can do is blow it with compressed air, but be careful not to blow a hole right thru it  :idea:
Logged
...Darcy
'97 Jetta 1.9TD ( dirtrag2 )
'88 Fox Wagon ( projekt Dirtrag 3 )
Reply #2January 26, 2009, 04:54:44 pm

53 willys

  • Guest
AEM "dry"intake filter
« Reply #2 on: January 26, 2009, 04:54:44 pm »
here you go...read this and then just watch the vid...I would say water should be fine....
http://www.aempower.com/Faqs.aspx?FaqCategoryID=22#80
Logged
Pages: [1]
« previous next »