I'm wanting to build a similar setup to the UPS III kit. I understand it uses a T03 turbo. These turbos are quite cheap to get, but I'm not too terribly familiar with what trim I would need. I see people running as much as 35psi with Garret T03s on TDs on these forums, what model turbo is used at that level? I plan to initially run 25psi or so with an 11MM pump and my Sprint 764s. I might just get the UPS III chiptuning software, unless I find something better in the meantime.
Thx in advance for any info,
--Matt
It's not going to happen if your running an ECU. You'll throw a limp code with in 5 minutes. UPS can't get there STG.III software to work with there "custom" turbo, so it's not going to work with a T3.
As far as I'm reading, with the wastegate set to 18psi or so the car shouldn't even throw a CEL with a wastegated turbo. I can get software from Aligator or his stateside distributor Quadcomm. I'm looking at either a diesel T25, K24, or the T03. I've also considered the GT20. It looks like this one:
http://www.turbocalculator.com/view-product.php?product=002-001-002 may be right...
--Matt