Author Topic: Who Can rebuild my T3 Turbo? (Read 3374 times)

dillenger1 · « **Reply #15 on:** January 20, 2009, 07:00:04 pm »

how do you guys get the compressor wheel off the cartridge?

zagarus · « **Reply #16 on:** January 20, 2009, 07:44:32 pm »

does anyone happen to have a link or a step by step DIY to turbo rebuilding? i wouldn't mind reading up on some turbo rebuilds that people have done. I'm all for learning new things, but only if i know i can do it properly.

zukgod1 · « **Reply #17 on:** January 20, 2009, 10:10:23 pm »

Quote from: "dillenger1"

how do you guys get the compressor wheel off the cartridge?

I use a propane torch to slightly heat the compressor wheel then I use a brass hammer and punch to drive it apart.

jtanguay · « **Reply #18 on:** January 20, 2009, 11:10:03 pm »

Quote from: "zukgod1"

Quote from: "dillenger1"
how do you guys get the compressor wheel off the cartridge?

I use a propane torch to slightly heat the compressor wheel then I use a brass hammer and punch to drive it apart.

don't forget to scribe its location :wink:

zukgod1 · « **Reply #19 on:** January 21, 2009, 09:57:34 am »

Quote from: "zukgod1"

I'm ULTRA careful to make sure it goes back together the same way it came apart.