Author Topic: Paging 935racer (Read 2289 times)

somepunk22 · « **on:** January 13, 2009, 01:04:33 pm »

Dave, I have sent you an email about month ago. Please reply. Thanks.

zukgod1 · « **Reply #1 on:** January 13, 2009, 01:05:27 pm »

You need to call him. Info in the Vendors area.

somepunk22 · « **Reply #2 on:** January 16, 2009, 01:28:46 pm »

Left a message... :evil:

somepunk22 · « **Reply #3 on:** January 19, 2009, 09:13:53 pm »

No response to phone calls, email, or pms. No surprise. i spent about $1k on a head from him that is crap. Anyone talk to him personally? Or just start spreading the word to other not to deal with him?

fatmobile · « **Reply #4 on:** January 20, 2009, 12:47:52 am »

Yeah, hard to believe he said your TD head wasn't rebuildable,..
then sold you an 11mm "B" head telling you it would work.

somepunk22 · « **Reply #5 on:** January 20, 2009, 06:45:58 pm »

Why won't a 11mm head work? Besides hole size?

Dave called today. He offered to take a look it if I send it back to him. Hopefully I can get a chance to get in into the garage.

Kudagra · « **Reply #6 on:** January 20, 2009, 07:32:59 pm »

Ive had nothing but good dealings with Dave.

Just want to put that out there.

fatmobile · « **Reply #7 on:** January 21, 2009, 02:37:24 am »

An 11mm head "B head" will work,..
but I wouldn't sell you one to put on a hopped-up TD block.
In my opinion; with the PP intake, fat exhaust etc, yours should have a real TD head.
You asked sooo,.. just my opinion.

Smokey Eddy · « **Reply #8 on:** January 21, 2009, 04:19:47 am »

aaz head
Like me!