Looking for confirmation on the correct orientation for the motor mount bushing. The new mount came in and it is marked "Top" in a location that would be 180 degrees different from the exisiting mount that is still in the bracket. Is this a PO issue ? Which way is correct ?
both are correct... old mount is same as new, just sagging badly
Thanks for the reply. So I'll install the new mount into the bracket as shown ( through hole below center ). Guess the fact that the old mount has "sagged" that much can explain the excessive vibration. Don't know alot about these cars but I am learning as I go along. Seems like I find something else that needs to be repaired with each project.
Those 2 mounts aren't nearly the same.
One is a five hole (the old one),..
and one is the heavy duty diesel AC mount.
Put the new one in just like you have it in the picture,.. with the space at the top,.. otherwise it will rest too solidly on the mount