Author Topic: FS ags tranny,starter,na exhaust,na intake,valve cover  (Read 3683 times)

November 10, 2008, 10:02:21 am

dillenger1

  • Veteran

  • Offline
  • ***

  • 777
FS ags tranny,starter,na exhaust,na intake,valve cover
« on: November 10, 2008, 10:02:21 am »
Ive got a transmission that i tore down and built up with the peloquin bolt kit.I visually inspected and resealed everything.Hasnt been operated since rebuild.$150 p.s the reverse plug is damaged,may work.
I also have a good diesel starter for $50.00
Na exhaust manifold $25.00
na intake and box $30.00
valve cover $20.00

Cummins 4bta- 85 dodge prospector short bed
28 mpg!!and i can pull down a house!
1.6td in toyota pickup
10mm head ,t3 intercooled.

Reply #1November 11, 2008, 03:08:45 am

dillenger1

  • Veteran

  • Offline
  • ***

  • 777
FS ags tranny,starter,na exhaust,na intake,valve cover
« Reply #1 on: November 11, 2008, 03:08:45 am »
bumps
Cummins 4bta- 85 dodge prospector short bed
28 mpg!!and i can pull down a house!
1.6td in toyota pickup
10mm head ,t3 intercooled.

Reply #2November 11, 2008, 07:55:00 am

Dakotakid

  • Veteran

  • Offline
  • ***

  • 1240
FS ags tranny,starter,na exhaust,na intake,valve cover
« Reply #2 on: November 11, 2008, 07:55:00 am »
Which air box is it? Is it the one with 4 + 2 clips = total of 6 clips.

Or is it a late '86 and later 4 clips total model (I like these!).

Thanks Ben.
The mask and the shot(s) are actually an IQ test. If you are wearing or circulating, you just failed the test. I can't feel sorry for you.