S-PAutomotive.com

Author Topic: Which VNT can support 150hp to the wheels  (Read 1951 times)

October 28, 2008, 05:14:40 pm

bugnut

  • Junior

  • Offline
  • **

  • 89
Which VNT can support 150hp to the wheels
« on: October 28, 2008, 05:14:40 pm »
I am working on my engine build and would like to add a vnt turbo.  Which one is good for 200 hp at the crank and 25 psi.  I have a super pump from Giles.  I also have a AAZ head for my 1.6 block.  ARP throughout the engine.  And it is going to be intercooled and water/meth injection.  Another question is if a vnt would not work what turbo will fit the bill.   Thanks Brian


1980 Rabbit  1.9/1.6 franko engine.  compound built in the works

Reply #1October 28, 2008, 05:25:34 pm

MJF

  • Veteran

  • Offline
  • ***

  • 581
Which VNT can support 150hp to the wheels
« Reply #1 on: October 28, 2008, 05:25:34 pm »
GT2052V is a bit small for 200hp, but very good to 150whp. IŽd try GT2252V for 200hp.
'74 VW Scirocco TD
'86 Audi 80q 1,9TDic
'01 Audi A6q 2,5TDI

Reply #2October 28, 2008, 05:41:51 pm

zaprzal

  • Junior

  • Offline
  • **

  • 160
    • turbodiesel.pl
Which VNT can support 150hp to the wheels
« Reply #2 on: October 28, 2008, 05:41:51 pm »
I would try gt2256v from mercedes 2,7cdi
1.6td 170hp 290nm powered by Holset - sold
golf mk2 1.9tdi PD 193hp/400nm ;)

Reply #3October 29, 2008, 08:42:11 pm

bugnut

  • Junior

  • Offline
  • **

  • 89
Which VNT can support 150hp to the wheels
« Reply #3 on: October 29, 2008, 08:42:11 pm »
While I was looking for the said turbos I ran across some hybrids from kerma.  I was looking at the hammerhead 1852.  That also looks like a viable option.  It also has the exhaust manifold so no adapters needed.
1980 Rabbit  1.9/1.6 franko engine.  compound built in the works

 

S-PAutomotive.com