Wholesale parts for all your cars

[Giles@PerformanceDiesel]

Hey Guys,

We wanted to let you all know that we are offering a complete selection of maintenance parts for your cars; VW and non VW. We have everything from pads and rotors to glowplugs and injectors.

Here is a small sample of some of the items we have

1.5/1.6 Timing Belt and Tensioner         37.50 (ContiTech belt, GMB Tensioner)
1.9 AAZ Timing Belt and Tensioner         66.65 -90.44 depending on year
1.9 AHU Timing Belt               32.65
1.9 AHU Tensioner               57.81
1.9 AHU Roller                  32.48

Bosch Duraterm Glowplugs            12.50
1.9 AAZ Metal Headgasket            45.50
Rubber Valve Cover Upgrade (Studs and VC gasket)    20.00

We can get pretty much any part you need, including rebuild parts, just ask.

Please email us with your list of parts and we will reply with prices. Emails are normally answered within 24 hours, excluding weekends.

Thanks Guys,
Giles

[email protected]
905-940-2266

[duffer]

Do you sell Bosch VE Injection Pump re-seal kits
    for the 1.6l TD and n/a?

[Giles@PerformanceDiesel]

Hi
yes we can sell you a complete re-seal kit, if you really insist
that kit is OEM Bosch BTW
Giles

[duffer]

Oh, Great!

   I'll probably need three DGK 121 kits.
   for the TD pumps, I have lying around.
   and a DGK 126 for the extra N/A pump.

   Yes, I'd prefer the original Bosch parts
   rather than the fake Chinese rubbish
   found on e-bay, et al.

   Thank you very much for such a prompt
   response.

[Giles@PerformanceDiesel]

ok no problem

i use a different NA kit
1 467 010 059 is that ok?
giles

[duffer]

ok no problem

i use a different NA kit
1 467 010 059 is that ok?
giles

  Well, actually I don't recognise that
  part number, however, relying
  entirely upon your universally acclaimed
  expertise   , I would assume that this
  kit is perfectly compatible and that
  the seals won't disintegrate when coming
  into contact with diesel fuel.

  Incidentally, I'm aware that you make your
  living re-sealing inj. pumps, etc., consequently,
  seeking to buy kits for a DIY might seem
  mildly offensive. However, these are just
  some pumps I know nothing about and, thus,
  not really worth spending any significant
  amount of money on them.

  Again, thank you for you response.

[BioDieselVW]

Can you get a 1.6TD Oil returnline for a kkk24 turbo?

[HoaftNom73]

Thanks for the reminder Christina Just ordered it right now Your designs ROCK

[GEE-BEE]

I NEED A 1.9 AAZ TURBO K03 OIL FEED LINE  ( NEW )

AND THE LARGE COOLANT LINE ( METAL ) NEW ALSO

LET ME KNOW
[email protected]

[fck]

you guys wouldn't happen to have a tenisoner pulley for the 1.6n/a motor with a/c, would you? for the accessory belt?