Author Topic: NEW PRICE! TDI Pistons in STD and .5mm Nüral Brand $425 + shipping  (Read 13103 times)

May 08, 2008, 01:03:41 pm

myke_w

  • Veteran

  • Offline
  • ***

  • 1099
TDI pistons are ready to ship.

Price is $425 USD + shipping in the lower 48 w/ paypal..

I accept visa, mastercard, discover, paypal, google checkout, money order, or personal check (must clear)

my paypal is [email protected]

I have them in TD and .5mm Over

can ship same day if you pay before noon EST..


Eye Candy Follows









« Last Edit: August 17, 2009, 09:33:50 am by myke_w »


Contact me for hard to find for idi and tdi parts


Reply #1July 01, 2008, 11:48:17 pm

bluemotion

  • User+

  • Offline
  • *

  • 22
FS TDI Pistons in STD and .5mm Nüral Brand (NEW PRICE)
« Reply #1 on: July 01, 2008, 11:48:17 pm »
Do these have the oil cooling holes in the crown of the piston like the KS pistons do?

Reply #2July 02, 2008, 09:14:40 am

myke_w

  • Veteran

  • Offline
  • ***

  • 1099
FS TDI Pistons in STD and .5mm Nüral Brand (NEW PRICE)
« Reply #2 on: July 02, 2008, 09:14:40 am »
No they don't and as far as I'm aware, KS TDI pistons aren't available on our side of the pond.
Contact me for hard to find for idi and tdi parts


Reply #3August 28, 2008, 09:30:21 am

Pat Dolan

  • Junior

  • Offline
  • **

  • 163
FS TDI Pistons in STD and .5mm Nüral Brand (NEW PRICE)
« Reply #3 on: August 28, 2008, 09:30:21 am »
I believe it is only the PD150 pistons that have the oil cooling ducts, not so?

Do you have the 1.6TD in +0.50mm?
lifetime VW enthusiast, racer, fixer, addict, etc.
'03 TDI Variant, MkII Golf Country, Mk1 and II Scirocco (gassers), a Vanagon aircooled, an Audi 2.0 TD waiting to become a Porsche TD (in my M471 924), FLD120/DDEC IV, Ford 7.3/450, Iveco D220 and some 6D14T Mitsus and a few more.

Reply #4November 03, 2008, 03:51:12 pm

myke_w

  • Veteran

  • Offline
  • ***

  • 1099
FS TDI Pistons in STD and .5mm Nüral Brand (NEW PRICE)
« Reply #4 on: November 03, 2008, 03:51:12 pm »
yep it's PD 150's - and yes I do have the 1.6TD in .5mm
 340 / set
Contact me for hard to find for idi and tdi parts


Reply #5August 17, 2009, 09:34:39 am

myke_w

  • Veteran

  • Offline
  • ***

  • 1099
Re: NEW PRICE! TDI Pistons in STD and .5mm Nüral Brand $425 + shipping
« Reply #5 on: August 17, 2009, 09:34:39 am »
new price
Contact me for hard to find for idi and tdi parts


Reply #6September 23, 2009, 04:46:43 pm

starrd

  • Junior

  • Offline
  • **

  • 128
Re: NEW PRICE! TDI Pistons in STD and .5mm Nüral Brand $425 + shipping
« Reply #6 on: September 23, 2009, 04:46:43 pm »
Mike, a quick question, when I bought some Nural brand pistons for my TD, they came with Goetze rings.  Do you know if these pistons have the Goetze rings as well?
Black 1996 Passat TDI Malone tune, K03/04 Hybrid, Keyless, VR6 Clutch & PP357's
White 1993 Passat TD - GTD nozzles, Keyless - Giles pump, K14, Intercooler, 228mm VR6 clutch & PP, CTN Trans etc
Red 1990 Corrado - custom chip by

Reply #7September 23, 2009, 09:57:43 pm

myke_w

  • Veteran

  • Offline
  • ***

  • 1099
Re: NEW PRICE! TDI Pistons in STD and .5mm Nüral Brand $425 + shipping
« Reply #7 on: September 23, 2009, 09:57:43 pm »
Nural, Goetze and FM, Glyco are all under the same umbrella - so --- yes for all practical purcposes they do.

;)

It's all European made stuff, not junk knock offs.
Contact me for hard to find for idi and tdi parts


Reply #8December 01, 2009, 06:01:49 pm

burnt_servo

  • Veteran

  • Offline
  • ***

  • 278
Re: NEW PRICE! TDI Pistons in STD and .5mm Nüral Brand $425 + shipping
« Reply #8 on: December 01, 2009, 06:01:49 pm »
does any one know if nural makes pistons for the 1.6 idi ?

thanks guys :)
1990 jetta , tweaked pump , tweaked turbo , ported head  2.5inch exhaust .

1993 dodge w250 , diesel ... removing the dead moose parts .

Reply #9December 02, 2010, 11:14:13 pm

SR Heer

  • Junior

  • Offline
  • **

  • 199
Re: NEW PRICE! TDI Pistons in STD and .5mm Nüral Brand $425 + shipping
« Reply #9 on: December 02, 2010, 11:14:13 pm »
Mike,
Do you or anyone else that you know of have these in standard and or one size over?
I would be putting in an AHU motor but I think these ALH pistons fit - am I not correct?
Thanks
97 Passat 1Z, 98 Jetta AHU, 91 Jetta AAZ TD, and 81 Rabbit Pickup

Reply #10December 02, 2010, 11:57:50 pm

myke_w

  • Veteran

  • Offline
  • ***

  • 1099
Re: NEW PRICE! TDI Pistons in STD and .5mm Nüral Brand $425 + shipping
« Reply #10 on: December 02, 2010, 11:57:50 pm »
Mike,
Do you or anyone else that you know of have these in standard and or one size over?
I would be putting in an AHU motor but I think these ALH pistons fit - am I not correct?
Thanks

Yes they should, you'll certainly want to check side clearance to be sure about fitment. Right now I have a set of the std HD oil cooled dome pistons I'd let go of for 450 plus shipping (that's $75 off)- They were installed momentarily in a motor I decided not to continue with but are in new condition. I also have the new hd ones for 550 + shipping in + .05

Let me know, be glad to get a set coming your way.

Contact me for hard to find for idi and tdi parts


 

Fixmyvw.com