Author Topic: retrofit Oil Pan Gasket with Baffle? Do I need one? (Read 1706 times)

Ziptar · « **on:** March 27, 2008, 10:18:24 am »

I was putting togetehr a list of parts I need on Autohaus Az's website and pulled up a pan gasket and they list two.
Part# 044103609D "Oil Pan Gasket; Reinforced Rubber" $13.56
Part# 037115220B " Oil Pan Gasket; With Baffle, Update retrofit with baffle plate to prevent oil pump starvation under severe conditions." $36.24

That is first I have seen of one with a baffle. I can see the point I guess, seems like a way to go. just not sure, any cons to using the upgraded one?

Thanks,

jimfoo · « **Reply #1 on:** March 27, 2008, 10:40:52 am »

My AAZ came stock with one. Since it's bonded to the baffle, it can't slip out of place either. You should get it.

burn_your_money · « **Reply #2 on:** March 27, 2008, 11:42:29 am »

yeah pretty much all engines after 93 made by VW had them. Not sure about the CLs though. I had one on my 1.6TD.

Ziptar · « **Reply #3 on:** March 27, 2008, 01:17:17 pm »

OK, Added to teh list. Thanks.